We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White paintable cable raceway kit with twenty 15.7in channels and assorted elbows and couplings

YesBes 315in Cord Hider Kit 20x15.7in White

SKU CH-BKY5-KWZ8V

Conceals wires along walls with a 315-inch paintable raceway kit including 20 channels and assorted fittings

  • Item nameYesBes
  • Placement and useSelf-Adhesive
  • Item descriptionYesBes, Plastic, 315 in, Self-Adhesive, 14.6 L x 0.95 W x 0.
  • Overall size14.6 in × 0.95 in × 0.1 in
  • Warranty periodDescription
  • Surface finishBlack
  • 315 in total length hides cables across large rooms
  • 20 channels plus fittings cover complex routing paths
  • Self-adhesive backing mounts without screws or drilling
  • UL94 V-0 flame rating protects wires from fire risk
  • Paintable surface blends with any wall colour

Cable management kit for wall-mounted TVs

This 315-inch cord hider kit contains 20 self-adhesive raceway channels measuring 15.7 inches each, plus couplings, elbows and T-fittings for routing wires along walls. It suits homeowners and renters who want to conceal power and AV cables behind a wall-mounted television without drilling holes. The white plastic channels can be painted to match any décor.

Flame-retardant channels with tool-free mounting

Each piece carries a UL94 V-0 rating for high flame retardancy, adding a layer of safety around electrical wiring. The strong adhesive backing allows one-step installation on smooth surfaces; no screws or drills are required. Channels can be cut with scissors or a saw to fit exact lengths, and the paintable surface blends with wall colour.

Replaces loose cables and exposed trunking

The kit upgrades from tangled wires or basic trunking that cannot be painted or shaped around corners. The jump is worthwhile when a clean, permanent-looking finish is needed on smooth walls and the installer prefers a no-drill solution. It does not suit textured walls where the adhesive will not bond.

How it compares

Measured against everything we stock in Cable Raceways & Cord Covers, at today’s prices. Recalculated every night.

Price $32.99
Pricier than about 79% of the 492 comparable items (median $19.99).

Specifications

Product
Brand nameYesBes
Part numberM-20p
Item nameYesBes
Size & build
Surface finishBlack
Main materialMetal
Product weight1.252 kg
Overall size14.6 in × 0.95 in × 0.1 in
Overall length15.7 in (39.9 cm)
More details
Placement and useSelf-Adhesive

Questions about this item

How do I install the self-adhesive cord covers without drilling, and what surface mistake should I avoid?

Peel the backing and press each 15.7 in piece onto a clean, smooth wall; the tape will not hold on textured surfaces, so test adhesion first.

When will the adhesive or the raceway itself need replacement?

The UL94 V-0 rated plastic resists heat and flame, so the channel rarely degrades; only the adhesive strip may lose grip after years, at which point fresh double-sided tape can be applied.

What is the maximum cable bundle the 0.96 in by 0.57 in channel can hide before it stops closing cleanly?

The inner cross-section fits roughly two to three standard HDMI or power cords; exceeding that makes the snap-on lid difficult to seat and can pop open over time.

More in Cable Raceways & Cord Covers

Similar items