YEWANG Anti-Vibration Feet for Bambu Lab X1/X1C/P1P/P1S (4 pcs)

Anti-Vibration Feet for Bambu Lab Printers

These four replacement feet fit Bambu Lab X1, X1C, P1P and P1S machines. They are made from heat-resistant silicone rated to 300 °C so they survive long, high-temperature print sessions without degrading. The upgraded slot design presses into place without tools and stays secure during rapid print-head movements. They suit home, office or multi-printer desks where a quieter, more stable platform is wanted.

Vibration Dampening and Noise Reduction

The single specification that decides fit is the slot profile matched to the X1 and P1 series chassis; no other mounting method is used. Each foot measures 2.8956 cm long, 5.588 cm wide and 7.493 cm high, weighing .059 kg in total for the set. The silicone material absorbs mechanical shocks and cuts resonance noise that would otherwise transfer to the desktop surface. Compatibility is limited to the four printer models listed above.

Capacity and Headroom

The set of four feet supports one complete printer, adding clearance underneath for easier debris cleaning and reducing cross-machine interference when several units share a bench. They handle continuous operation at elevated chamber temperatures thanks to the 300 °C silicone rating. They do not increase the printer’s build volume, change its motion-system performance or replace any structural levelling components. Buyers needing isolation for heavier industrial printers or a different mounting pattern will need a different solution.