We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten carbide router bits with single up-spiral flutes

YINGHUA

YINGHUA 10PCS 6x17x45mm Single Flute UP Spiral Carbide Router Bit

SKU CH-V4T7-BX4A8

Set of ten single-flute up-spiral carbide router bits, 6×17×45 mm, for acrylic, PVC, wood and MDF at 20000–24000 RPM

  • Product typeRight-Angle Drills
  • 10-piece carbide set covers acrylic, PVC, MDF and wood
  • Single-flute up-spiral geometry clears chips for clean edges
  • Tungsten-cobalt alloy resists wear at 20000-24000 RPM
  • 6 mm shank, 17 mm cut length, 45 mm overall fits standard CNC collets

10-Piece Carbide Router Bit Set for CNC Milling

This set contains ten single-flute up-spiral router bits made from tungsten cobalt alloy. Each bit measures 6x17x45mm and is designed for use in CNC end-mill applications. The cutters are intended for milling acrylic, PVC, plastic, wood, multilayer board, plywood and MDF with a high surface finish.

Suited for High-Speed CNC Work on Soft Materials

The bits operate at spindle speeds between 20000 and 24000 RPM with feed rates of 1 to 10 m/min depending on the workpiece. They are not suitable for machining ferrous metals, hardened steels or abrasive composites that require specialised coatings or different flute geometries. Buyers needing larger diameters or multi-flute designs for chip evacuation in deep pockets should look at alternative tooling.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $104.99
Pricier than about 58% of the 2,412 comparable items (median $81.99).

Specifications

Product
Product typeRight-Angle Drills

Questions about this item

What spindle speed range does my CNC need to run these 6 mm carbide bits at 20000-24000 RPM?

The bits are rated for 20000-24000 RPM spindle speed, so your machine must reach at least 20000 RPM and hold it steadily while cutting.

Can I keep using my existing collet if it takes a 6 mm shank and the bits are 45 mm long?

Yes — the shank is 6 mm and the overall length is 45 mm, so any collet that accepts 6 mm shanks and has enough clamping depth will hold them.

More in Power Drills, Drivers & Cutting Bits

Similar items