We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten carbide router bits, single up-spiral flute, grey metal finish

YINGHUA

YINGHUA 10PCS 6x22x45mm Single Flute UP Spiral Cutter Carbide Router Bit

SKU CH-PF0N-M59K5

Set of 10 carbide router bits with 6 mm shank, 22 mm cut length and 45 mm overall length for acrylic, PVC, wood and MDF at 20000-24000 RPM

  • Product typeRight-Angle Drills
  • 10-piece carbide set covers acrylic, PVC, wood and MDF
  • Single-flute up-spiral clears chips for cleaner cuts
  • Tungsten cobalt alloy resists wear at 20000-24000 RPM
  • 6 mm shank, 22 mm cut length, 45 mm overall fits standard collets

10-Piece Carbide Router Bit Set for CNC Milling

This 10-piece set provides tungsten cobalt alloy router bits with a 6 mm shank, 22 mm cutting length and 45 mm overall length. The single-flute up-spiral geometry is designed for chip evacuation in acrylic, PVC, plastic, wood, multilayer board, plywood and MDF where a high surface finish is required.

Sustained Cutting at 20 000–24 000 RPM

The bits are rated for continuous spindle speeds of 20 000 to 24 000 RPM with feed rates of 1 to 10 m/min depending on the material. The single-flute design reduces heat build-up during prolonged passes, making the set suitable for extended CNC sessions rather than only short drilling bursts. Builders needing multi-flute roughing or larger-diameter profiling will need different tooling.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $124.99
Pricier than about 64% of the 2,412 comparable items (median $81.99).

Specifications

Product
Product typeRight-Angle Drills

Questions about this item

How much heat does the 6x22x45mm carbide router bit generate during continuous CNC milling?

The single-flute up-spiral design clears chips efficiently, reducing friction and heat build-up when run at the recommended 20000-24000 RPM spindle speed with 1-10 m/min feed.

What shank size must my CNC router or drill press accept for these 10 tungsten-cobalt alloy bits?

Each bit has a 6 mm shank, so your machine needs a 6 mm collet or chuck to hold them securely.

More in Power Drills, Drivers & Cutting Bits

Similar items