TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one HDMI or VGA signal across four HDMI displays in eight splicing layouts with 180-degree rotation on the top row
This YINGHUA unit splits a single HDMI or VGA source across four HDMI displays in a 2-by-2 grid. It is built for installers and operators who need a large combined image wall for signage, control rooms or presentation spaces without a dedicated graphics card.
Connect the source with a standard HDMI cable up to 10 metres AWG24 and run four output cables of the same length and gauge to the screens. Power the device from the included 5 V DC 1 A adapter on 100-240 V AC. The remote requires a separate battery. A frequent mistake is forgetting to set the input resolution to 4K at 30 Hz or lower, which the scaler cannot exceed.
The controller accepts 4K30, 1080p, 1080i, 720p, 576p, 576i or 480p input and down-scales each quadrant to 1080p, 1080i, 720p, 576p, 576i or 480p output. It handles eight splicing layouts including 1x3, 3x1, 1x4 and 4x1, and rotates the top two panels 180 degrees in 2x2 mode. It cannot pass native 4K to each screen, output higher than 1080p, or support more than four displays.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | HDMI |
Each of the four HDMI outputs should show one quarter of the source image at 1080P; use the remote to confirm the 2x2 automatic splicing mode is active and the top two displays are rotated 180° if that layout is selected.
The box contains the controller, a 5V DC 1A power adapter with AU plug, a remote control without battery and a user manual; you must supply HDMI cables for the input and four outputs and a battery for the remote.
Select 2x2 for a square four-screen wall with optional 180° rotation on the top row; choose 1x3 or 3x1 for three-screen horizontal or vertical strips, and 1x4 or 4x1 for four-screen single-row or single-column layouts.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?