We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tungsten carbide milling cutter with 6x10D shank and 4.2mm downcut flute

YINGHUA

YINGHUA 6x10D Down4.2 B Tungsten Carbide Milling Cutter

SKU CH-ZV0W-ATV0T

Tungsten-carbide milling cutter slots acrylic for neon LED light-strip channels at 22 000 rpm spindle speed

  • Product typeRight-Angle Drills
  • Tungsten-carbide construction stays sharp through repeated acrylic cuts
  • 6 × 10D Down4.2 B geometry matches adhesive-strip slots
  • 22000 rpm spindle speed enables clean neon-light grooving
  • 8000 machining speed with 80 % feed rate optimises material removal

Tungsten Carbide Slotting Cutter for Acrylic

This single-flute end mill is manufactured from top-grade tungsten steel to stay sharp and resist wear during repetitive slotting. It targets sign-makers and fabricators who cut channels for adhesive LED strips in acrylic advertising panels. The right-angle drill geometry keeps the tool stable when plunging into sheet material.

Replaces worn or undersized router bits

Swapping to this cutter is worthwhile when an existing bit leaves ragged edges or cannot match the strip width you are installing. The supplier recommends running at 22000 rpm with an 8000 feed rate and 80% engagement for clean results. Buyers needing wider channels or a different shank diameter should select a matching cutter instead.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $59.99
Cheaper than about 58% of the 2,412 comparable items (median $81.99).

Specifications

Product
Product typeRight-Angle Drills

Questions about this item

What diameter adhesive strip matches the 4.2 mm down-cut specification of this milling cutter?

Select the blade diameter that corresponds to the width of your adhesive strip; the 4.2 mm down-cut dimension is designed for strips of that exact size.

Which step is most often missed when setting 22000 rpm spindle speed with 8000 mm/min feed at 80 % feed rate?

Operators frequently forget to lower the feed rate to 80 % after programming the 22000 rpm spindle speed and 8000 mm/min machining speed.

More in Power Drills, Drivers & Cutting Bits

Similar items