YINGHUA 6X32X60mm 3A Up Down Compound Single Flute Spiral Carbide Mill Tool Cutter

Compact Carbide End Mill for CNC Woodworking

The YINGHUA 6X32X60mm single-flute compression cutter is built for CNC routers that need clean edges on both faces of the workpiece. Its up-cut and down-cut geometry pulls chips upward while pressing the top surface down, reducing tear-out on laminated boards. The solid tungsten-steel body resists wear during extended production runs. Operators must be over 18 and the tool is restricted to industrial cutting applications.

Replaces Separate Up-Cut and Down-Cut Bits

A single compression flute eliminates the need to switch between dedicated up-cut and down-cut routers when machining double-sided materials. The change is worthwhile when a job demands through-cuts on plywood, density board or solid wood without flipping the panel. It also reduces tool-change time on multi-operation programs. The cutter is not suited for metal, stone or abrasive composites that would dull the carbide quickly.

32 mm Cutting Length for Medium-Depth Passes

The 32 mm flute length provides enough engagement for typical sheet-goods thicknesses while keeping deflection low on a 6 mm shank. It handles acrylic, PVC and wood boards cleanly at standard feed rates. Deeper pockets or full-thickness cuts on stock thicker than the flute length will require multiple passes or a longer tool. The single-flute design prioritises chip evacuation over maximum material-removal rate in heavy slotting.