We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black box with three HDMI inputs, one output, front button and IR remote

YINGHUA

YINGHUA 8K HDMI 2.1 KVM Switch 3x1 48Gbps IR Remote

SKU CH-SZ8H-3MWFF

Switches three HDMI 2.1 sources to one display at up to 8K 60Hz and 4K 120Hz with 48Gbps bandwidth, HDR, HDCP 2.3 and IR remote control

  • Product typeHDMI
  • Switch 3 devices on one screen with IR remote
  • 8K 60 Hz and 4K 120 Hz via HDMI 2.1
  • 48 Gbps bandwidth carries HDR and HDCP 2.3
  • 1 audio with DTS-HD and Dolby TrueHD
  • 24 30 36 bit colour depth for accurate video

3-Port 8K HDMI 2.1 KVM Switch

The YINGHUA 3x1 switch connects three HDMI 2.1 sources to a single display. It supports 8K at 60 Hz and 4K at 120 Hz with 48 Gbps bandwidth. Gamers and home-theatre users can toggle between consoles, PCs or streamers without swapping cables.

Upgrade from manual cable swapping

Moving to this unit is worthwhile when sources and the display both run HDMI 2.1 and certified Ultra High Speed cables are used. Without HDMI 2.1 on both ends the 8K 60 Hz and 4K 120 Hz modes cannot be realised.

Push-button or IR remote switching

The switch is powered from the HDMI lines and works immediately. Common issues arise when non-certified cables limit bandwidth or when one source lacks HDMI 2.1, causing the link to fall back to lower resolutions.

How it compares

Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.

Price $96.99
Typical for this category: the median of 4,010 items is $105.49.

Specifications

Product
Product typeHDMI

Questions about this item

What HDMI cable length and gauge does the YINGHUA 8K 3x1 switch support for reliable 48 Gbps transmission?

The switch works with standard HDMI 2.1 cables up to 2 metres long and AWG24 gauge to maintain the full 48 Gbps bandwidth for 8K@60 Hz or 4K@120 Hz signals.

How do I switch between the three HDMI inputs on the YINGHUA 8K 3x1 switch, and what is the common mistake to avoid?

Press the easy-click button on the unit or use the included IR remote; the common mistake is forgetting that both the source device and the display must be HDMI 2.1 compliant and connected with certified Ultra High Speed cables to achieve 8K@60 Hz or 4K@120 Hz.

When should I replace the HDMI cables used with the YINGHUA 8K 3x1 switch to keep 8K@60 Hz performance?

Replace any cable that is longer than 2 metres, heavier than AWG24, or not labelled HDMI 2.1 Ultra High Speed, because only certified 2-metre AWG24 cables are specified to sustain the 48 Gbps link required for 8K@60 Hz.

More in KVM Switches & Rack Consoles

Similar items