YINGHUA Narrow Door Electric Bolt Mortise Lock DC 12V Silver NC
A narrow-door mortise bolt lock running on 12 V DC with adjustable 0, 3 or 6 second delay and selectable NC/NO secure mode
- Main functionEntrance
- Product typeChain Guard
- Main materialMetal
- Narrow profile fits slim doors with 28 mm width
- DC 12 V operation draws only 0.09 A in working state
- Adjustable 0, 3, 6 second delay suits access control timing
- NC/NO selectable mode integrates with diverse security systems
- Built-in surge absorber protects circuitry during installation and use
Narrow Door Electric Bolt Mortise Lock
This electric bolt mortise lock is designed for narrow doors in access control systems. It operates on DC 12V power and fits aluminium, wooden, metal or security doors. The unit includes the lock body, a faceplate and mounting screws for installation.
Upgrade From Basic Latches
It replaces simple mechanical latches or older electric strikes that lack feedback signals or adjustable time delays. The jump is worth it when an access control system requires a fail-safe or fail-secure mode with positive and negative pole protection and surge absorption built in.
Suits Integrators Needing Feedback
Installers who need a feedback signal for monitoring lock status and a choice of NC or NO secure modes will find it suitable. Buyers who need a battery-powered or wireless lock, or who require a wider bolt for standard door profiles, should look at something else.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $510.99
- Pricier than about 91% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Product type | Chain Guard |
| Size & build | |
| Main material | Metal |
| More details | |
| Main function | Entrance |
Questions about this item
What door thickness or stile width does the 200 mm by 28 mm by 38 mm mortise body require?
The lock body measures 200 mm long, 28 mm wide and 38 mm deep, so the door stile must accommodate at least a 28 mm wide by 38 mm deep pocket.
Which wires must be connected for the 12 V DC supply and the NC or NO feedback signal?
Connect DC 12 V to the power terminals; the lock draws 0.9 A at start-up and 0.09 A while holding. Wire the feedback circuit to the NC or NO contacts depending on the chosen secure mode.
How often should the bolt mechanism and mounting screws be inspected after installation?
Check the bolt throw, faceplate alignment and all supplied screws every six months; tighten any that have loosened and verify the delay setting remains at 0, 3 or 6 seconds.
More in Door Lock Sets & Deadbolts
Similar items
Deltana Enterprises Grade 1 Commercial Entry Lock Clarendon Brushed Chrome
Yale Accentra AUCN88182FL 626 Classroom Mortise Lockset
- Door Hardware & Com…
- 8800FL Augusta
Master Lock Lockout Padlock Keyed Alike Orange 1-13/16 in Pack of 3
- Safety
YINGHUA Chain Guard Door Lock Metal Entrance 122U 13.56MHz 424Kbps 50 UID Keys
- Entrance
- Chain Guard





