YINGHUA Right-Angle Drill 8x22mm Tungsten Steel
Right-angle drill bit with 8 mm shank and 22 mm cutting length for wood, plywood and particleboard
- Product typeRight-Angle Drills
- Solid carbide construction resists wear for longer tool life
- Right-angle design enables drilling in tight corners and confined spaces
- 8 mm shank fits standard collets and chucks without adapters
- 22 mm cutting length handles deep mortises and thick workpieces
- Tungsten steel cuts hardwood, plywood and particleboard cleanly
Right-Angle Drill for Woodworking
The YINGHUA right-angle drill is a tungsten steel router bit designed for cutting wood, plywood, density board, solid wood and particleboard. Its solid carbide construction provides durability for industrial milling and engraving tasks. The 8x22mm shank fits compatible routers for precise bottom cleaning and shaping operations. This tool is intended for professional woodworking applications.
Fits Standard Router Collets
The 8mm shank mounts directly into matching collets on handheld or table-mounted routers. No adapters or proprietary hardware are required for installation. The right-angle geometry allows access to tight corners and recessed areas where straight bits cannot reach. It frees up workflow by combining cleaning and engraving passes in a single setup.
Replaces Worn Carbide Bits
This cutter replaces dull or damaged solid carbide router bits used for bottom cleaning and detail engraving. The jump is worth it when existing bits leave tear-out on plywood or density board, or when cutting edges show visible wear. It is not suited for metal, plastic or non-wood composites, and cannot be used by anyone under 18 years old.
How it compares
Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 91% of the 2,412 comparable items (median $81.99).
Specifications
| Product | |
|---|---|
| Product type | Right-Angle Drills |
Questions about this item
How deep can the 22 mm flute cut before chip evacuation becomes the limiting factor?
The 22 mm flute length sets the maximum depth of cut; once the flutes fill with chips the bit stops clearing material and must be withdrawn.
How hot does the tungsten-steel body get during continuous routing in dense board?
Tungsten steel dissipates heat well, but sustained full-width cuts in particleboard or density board will raise the shank temperature noticeably; allow cooling pauses.
What collet or chuck size is required to hold the 8 mm shank?
An 8 mm collet or a three-jaw chuck that closes to 8 mm is needed; standard 1/4 in or 1/2 in collets will not grip the metric shank.
More in Power Drills, Drivers & Cutting Bits
Similar items
YINGHUA
YINGHUA 10PCS Single Flute UP Spiral Cutter 6x22x45mm
- Right-Angle Drills
$119.99
0.00145115BTC
In stock