YINGHUA Right-Angle Drill Bit 6X32mm Tungsten Steel
Right-angle tungsten-steel bit cuts wood, plywood and particleboard with a 6 mm shank and 32 mm cutting length
- Product typeRight-Angle Drills
- Right-angle design reaches tight corners easily
- Tungsten steel construction resists wear during heavy use
- Cuts wood, plywood, density board and particleboard
- Solid carbide tip maintains sharp edges longer
- Industrial-grade cutter built for demanding woodworking tasks
Right-Angle Drill Bit for Wood
The YINGHUA right-angle drill bit is a tungsten steel cutter sized at 6X32mm. It is designed for woodworkers and cabinetmakers who need to reach tight corners when boring holes in solid wood, plywood, density board or particleboard. The solid carbide construction resists wear during repeated use on abrasive sheet goods.
Sustained Cutting in Engineered Panels
Under continuous load the carbide tip maintains its edge longer than standard steel when milling particleboard and density board. Heat builds more slowly in the tungsten steel body, reducing the risk of burning dense hardwoods during deep passes. The tool is rated for industrial cutting only and must not be operated by anyone under 18 years of age.
Shank Fit and Common Setup Errors
The shank must seat fully in the collet or chuck to prevent runout that snaps the slender neck at the 32mm length. Users often forget to clear chips from the flute, which packs the gullet and forces the bit to wander in plywood layers. Always match the shank diameter to your holder and run at speeds suited to carbide in wood.
How it compares
Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 83% of the 2,412 comparable items (median $81.99).
Specifications
| Product | |
|---|---|
| Product type | Right-Angle Drills |
Questions about this item
Does the 32 mm tungsten-steel cutter generate noticeable heat when used continuously in dense board?
The solid-carbide tip resists heat build-up during extended cuts in plywood or particleboard, keeping the bit cool enough for uninterrupted work.
What shank size must my router or drill accept to hold this 6 mm bit?
A 6 mm collet or chuck is required; the bit will not fit 1/4-inch or 8 mm holders without an adapter.
Can this right-angle bit be driven by an older corded drill that only runs at a single speed?
Yes, the cutter works at any constant RPM a standard drill provides, so a single-speed corded model is suitable.
More in Power Drills, Drivers & Cutting Bits
Similar items
YINGHUA
YINGHUA 10PCS Single Flute UP Spiral Cutter 6x22x45mm
- Right-Angle Drills
$119.99
0.00146099BTC
In stock
COSLUS C40 Corded Electric Nail Drill 220V 1000 RPM 20000 BPM Purple
- 220 V
- Corded
$19.99
0.0002434BTC
In stock