We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tungsten carbide right-angle milling cutter with 8x6D shank and 4.2mm down-cut flute

YINGHUA

YINGHUA Right-Angle Drill Slotting Milling Cutter 8x6D Down4.2 Tungsten Carbide

SKU CH-4628-HFGY1

Tungsten-carbide right-angle cutter mills 4.2 mm slots for acrylic LED-strip channels at 22,000 rpm spindle and 8,000 mm/min feed

  • Product typeRight-Angle Drills
  • Precise acrylic slotting with 4.2 mm down-cut depth
  • Tungsten carbide construction stays sharp through extended use
  • Optimised 22000 rpm spindle speed for clean cuts
  • Recommended 8000 mm/min feed at 80% rate for efficient milling

Right-Angle Tungsten Carbide Cutter

This right-angle drill slotting milling cutter is made from top-grade tungsten steel for sharp, durable cutting. It is intended for acrylic advertising word and light-strip moulding work. Select the blade diameter to match the adhesive strip size being used. The tool is supplied new as a single piece.

Sustained-load processing parameters

The manufacturer recommends running the cutter at 22000 rpm with an 8000 machining speed and 80% feed rate for continuous operation. These figures are given for steady slotting rather than short bursts. Following them helps maintain edge life in tungsten carbide during extended cuts.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $68.99
Cheaper than about 55% of the 2,412 comparable items (median $81.99).

Specifications

Product
Product typeRight-Angle Drills

Questions about this item

How much heat and noise does the cutter generate when running continuously at 22000 rpm?

At the recommended 22000 rpm the tungsten carbide cutter produces normal milling heat and sound levels for a right-angle drill; no specific decibel or temperature figures are published.

What shank size or collet must my drill already have to accept the 4.2 mm down-cut diameter?

The cutter requires a right-angle drill chuck or collet that can grip a 4.2 mm shank; verify your tool's capacity before purchasing.

More in Power Drills, Drivers & Cutting Bits

Similar items