We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New thermal print head component for Wintec WIN58-PG Silver Treasure EF-630 6300

YINGHUA

YINGHUA thermal print head for Wintec WIN58-PG Silver Treasure EF-630 6300

SKU CH-83KK-V6MWZ
  • Product categoryPrinthead
  • Direct replacement for Wintec WIN58-PG Silver Treasure EF-630 6300 printers
  • New thermal print head restores crisp receipt output
  • Designed for 58 mm thermal paper width
  • Ready to install in compatible 6300 series devices

Compatible print head for Wintec WIN58-PG

This YINGHUA thermal print head is designed as a direct replacement for the Wintec WIN58-PG Silver Treasure EF-630 6300 printer. It restores printing capability for point-of-sale and labelling tasks when the original head wears out. The part matches the 58 mm print width specification of the host device. Install it to resume clear receipt and label output without changing your workflow.

Thermal operation with standard power draw

The head uses direct thermal technology that requires no ink ribbon or toner cartridge. Heat is generated only across the active dots during printing, keeping idle power draw low. Normal operation produces minimal mechanical noise from the paper feed alone. The assembly mounts into the existing carriage using the factory fixing points, so no extra cooling or wiring changes are needed.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $22.99
Cheaper than about 92% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product categoryPrinthead

Questions about this item

How do I install the YINGHUA thermal print head in the Wintec WIN58-PG EF-630, and what step is often missed?

Power off the printer, open the print-head latch, align the 58 mm head with the carriage pins, press firmly until the latch clicks shut, then run the self-test — skipping the latch click leaves the head loose and causes gaps.

What maintenance or replacement will the YINGHUA print head for the EF-6300 need later?

Clean the 58 mm heating line with an isopropyl swab after every few rolls; replace the head when text fades or vertical streaks persist after cleaning, as the thermal elements wear out with use.

More in Print & Scan Accessories

Similar items