We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two-flute carbide end mill, silver cylinder, 45 mm long

YINGHUA

YINGHUA Two Flutes UP DOWN Cut Carbide Mill Cutter 4X17X45MM

SKU CH-1E1Q-CDZT8

Two-flute up-down spiral carbide cutter mills wood, plywood and particleboard with compression action

  • Product typeRight-Angle Drills
  • Two-flute up/down spiral gives clean compression cuts in wood and PVC
  • Tungsten-steel construction resists wear for longer tool life
  • 45 mm overall length fits standard CNC collets
  • 17 mm cutting depth handles thick panels in one pass
  • Single-piece pack supplies one ready-to-use cutter for industrial cutting only

Two-flute compression cutter for CNC

This solid-carbide end mill uses opposing up-cut and down-cut spirals to compress the workpiece during milling, producing clean edges on both faces. The two-flute geometry provides efficient chip evacuation while maintaining rigidity. It is intended for CNC routing of wood-based panels and PVC sheet.

4 mm shank with 17 mm cutting length

The cutter has a 4 mm shank diameter and 17 mm flute length within an overall 45 mm length. Tungsten steel construction gives the hardness and wear resistance required for abrasive composites such as particleboard and density board. These dimensions decide whether the tool fits your collet and reaches the required depth.

Woodworkers and sign makers needing burr-free edges

Suited for operators cutting plywood, solid wood, particleboard or PVC on a CNC router where top and bottom surface finish matter. Not for hand-held drills, metal machining, or any application requiring a different shank diameter or longer reach than 17 mm.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $25.99
Cheaper than about 76% of the 2,412 comparable items (median $81.99).

Specifications

Product
Product typeRight-Angle Drills

Questions about this item

How deep can the 17 mm flute cut in a single pass?

The 17 mm flute length sets the maximum depth of cut per pass; deeper slots require multiple passes.

What shank diameter does the 4 mm cutter need in the collet?

The 4 mm shank fits a 4 mm ER collet or a 4 mm drill chuck; match the collet to the shank for concentric grip.

Will the 45 mm overall length clear my CNC router Z-travel?

At 45 mm overall length, the cutter needs at least 45 mm of Z clearance plus workpiece thickness; measure your gantry height before buying.

More in Power Drills, Drivers & Cutting Bits

Similar items