We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PETG filament spool, 1.75 mm diameter, glossy finish, vacuum-sealed

Yoopai P-PETG-Black PETG Filament 1.75mm 1KG Black

SKU CH-3WKG-CY8R9

1.75 mm PETG filament on a 1 kg spool prints odourless with a glossy finish and ±0.03 mm tolerance

  • Product colorBlack
  • Main materialPolyethylene Terephthalate Glycol
  • Product weight2.56 lb (1.16 kg)
  • Odorless printing with eco-friendly PETG material
  • Toughness-enhanced formula resists cracking and warping
  • High precision 1.75mm diameter with +/- 0.03mm tolerance
  • Tangle-free mechanical winding prevents snapping and breakage
  • Vacuum-sealed moistureproof packaging eliminates clogging and bubbles

Yoopai PETG Filament 1.75 mm 1 KG Black

This Yoopai PETG filament is a 1.75 mm diameter spool weighing 1 kg and coloured black. It is made from Polyethylene Terephthalate Glycol and offers a glossy finish with high toughness. The material is odourless and moisture-resistant, supplied vacuum-sealed to prevent bubbles. It is designed for FDM 3D printers that accept 1.75 mm filament.

Best for makers needing strong odourless prints

Suitable for users who want a tough, low-odour filament with good layer adhesion and a glossy surface. The +/- 0.03 mm diameter tolerance supports steady extrusion on most 1.75 mm FDM machines. Not for buyers who require a different diameter, a non-PETG material, or a larger spool size than 1 kg.

Diameter tolerance +/- 0.03 mm

The filament specifies a diameter tolerance of +/- 0.03 mm, which determines how consistently it feeds through the extruder. Tight tolerance reduces the risk of jams and improves dimensional accuracy of printed parts. Verify that your printer works with 1.75 mm filament and the recommended 220-250 °C nozzle and 70-80 °C bed temperatures.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 67% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameYoopai
Model nameP-PETG-Black
Product colorBlack
Size & build
Main materialPolyethylene Terephthalate Glycol
Product weight2.56 lb (1.16 kg)

Questions about this item

What 3D printer nozzle diameter and filament-size compatibility do I need to use this 1.75mm PETG spool?

Your printer must accept 1.75mm filament and have a hot-end that can reach 220-250°C with a heated bed capable of 70-80°C.

Will the +/-0.03mm diameter tolerance on this PETG feed reliably through my older direct-drive extruder?

The tight 1.75mm ±0.03mm tolerance and mechanical winding are designed for smooth, tangle-free feeding on most 1.75mm FDM printers, including older direct-drive systems.

How can I verify the filament is printing correctly once I start a test print?

Look for consistent extrusion without bubbles or clogging, good layer adhesion at 220-250°C, minimal warping on the 70-80°C bed, and a glossy black finish on the completed part.

More in 3D Printer Filament

Similar items