Zell Electronics USB 3.1 Front Panel Header Male to Female Type-E Extension Cable 50cm
Extends a motherboard USB 3.1 Type-E front-panel header by 50 cm with a male-to-female cable
- Connection typeUSB C to Mini USB
- Extends USB 3.1 front-panel header by 50 cm
- Male Type-E to female Type-E for direct motherboard fit
- Black cable measures 3.94 × 3.94 × 0.39 cm
- USB 3.1 header differs from USB 3.0 design
- New condition ready for immediate installation
USB 3.1 Front Panel Extension
This 50 cm extension cable connects a USB 3.1 Type-E motherboard header to a front-panel port. It is designed for builders who need to route the internal header to a case front panel without signal loss. The male-to-female layout preserves the keyed connector orientation. The black cable measures 3.94 by 3.94 by 0.39 cm at the connector ends.
Upgrade from USB 3.0 header
USB 3.1 requires a different front-panel header than USB 3.0, so this cable bridges the new Type-E pinout to existing case ports. The jump is worth it when a motherboard supplies only a Type-E header but the chassis front panel uses the older internal connector. No active conversion is involved; the wiring simply extends the native lanes.
Build integration notes
The 50 cm length suits mid-tower and larger chassis where the header sits far from the front panel. It plugs directly into the motherboard Type-E header and accepts the case front-panel plug on the female end. No extra power or drivers are needed. Builders with very compact cases or non-standard header placement should verify reach before ordering.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 70% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | USB C to Mini USB |
Questions about this item
What is the length of the cable for routing to a front-panel Type-E header?
The cable is 50 cm long, giving enough reach for most mid-tower and full-tower cases.
Which way round do the male and female Type-E connectors go on the motherboard and front panel?
Plug the male end into the motherboard's USB 3.1 Type-E header and the female end into the front-panel cable; reversing them breaks the link.
When should the cable be replaced if front-panel USB 3.1 speeds drop or ports become intermittent?
Inspect the connectors for bent pins or cable kinks after any case rebuild; replace the cable if signal errors persist.
More in USB Cords & Extension Cables
Similar items
Vszerda USB 3.1 Type-E 20Pin to USB 2.0 2×9pin Hub Adapter
- Usb 2.0
- USB 2.0
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda U3-066-U2-XY Internal USB 2.0/3.0 Panel Hub 50cm 12cm PCI Bracket
- Usb3.0
- USB
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda USB 3.0 Micro Male to Micro Type-B Female Extension Cable 50cm Screw Mount
- Micro USB
- Micro USB





