We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical nickel-plated brass sensor with red plastic face M12 thread 4mm range

ZIBOO

ZIBOO IME12-04BPSZC0K Inductive Proximity Sensor PNP 4mm M12 electrician tool

SKU CH-H4YG-8YNJ2 MPN IME12-04BPSZC0K

A flush-mount M12 inductive proximity sensor with 4 mm sensing range, PNP NO output, 2,000 Hz switching frequency and IP67-rated nickel-plated brass housing

  • Labor warranty1 Year
  • Product typeTest Equipment
  • Color and finishRed
  • Number of items1 pack
  • Sold asBox
  • Parts warranty3 Years
  • Detects metal at 4 mm flush range
  • Switches up to 2,000 Hz for fast signals
  • PNP normally-open output suits DC controls
  • IP67 metal housing survives –25 °C to +75 °C
  • M12 4-pin connector enables quick wiring

M12 Inductive Sensor for Flush Mounting

The ZIBOO IME12-04BPSZC0K is a cylindrical inductive proximity sensor with a 4 mm sensing range and a short M12 × 1 metal housing. It provides a PNP normally-open output on a 4-pin M12 connector and operates on 10 to 30 V DC. The IP67-rated brass body suits industrial automation and machine-monitoring tasks where a compact flush mount is required.

Wiring and Mounting Notes

A DC 3-wire connection mates with the male M12 plug; ensure the supply stays within 10 to 30 V DC with ripple below 10 %. The sensor draws 10 mA and delivers up to 200 mA continuous current with short-circuit, reverse-polarity and power-up pulse protection. Tighten the M12 thread to no more than 12 Nm; the 29 mm thread length and 46 mm overall body fit standard mounting brackets without special tools.

Pre-Installation Checks

Verify that the target material and mounting geometry allow the 3.24 mm safe sensing range and that ambient temperature stays between –25 °C and +75 °C. Confirm the control system accepts a PNP NO signal at up to 2,000 Hz switching frequency and tolerates a 2 V voltage drop. The nickel-plated brass housing and PA 66 sensing face resist to IP67, so check cable routing and connector sealing for the intended environment.

How it compares

Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.

Price $60.99
Cheaper than about 74% of the 5,006 comparable items (median $95.99).

Specifications

Product
Brand nameSICK
Model nameIME12-04BPSZC0K
Product typeTest Equipment
Color and finishRed
In the box
Number of items1 pack

Questions about this item

How can I verify the IME12-04BPSZC0K is operating correctly after installation?

Power the sensor with 10 V DC to 30 V DC and bring a metal target within 4 mm of the sensing face; the PNP NO output should switch, indicated by the load activating at up to 200 mA.

What comes in the box and what must I source separately?

The box contains one IME12-04BPSZC0K sensor with an M12 x 1 thread, 46 mm housing length and 4-pin M12 male connector; you must supply a compatible 4-pin M12 cable and a 10 V DC to 30 V DC power source.

Which sensing-range version should I choose for flush mounting in an M12 thread?

This model provides a 4 mm nominal sensing range and a 3.24 mm safe sensing range, designed for flush installation in an M12 x 1 threaded hole with a maximum tightening torque of 12 Nm.

More in Electrical Trade Tools & Kits

Similar items