Zipwall NSP2 Non-Skid Plate Red/White Pair
Plastic non-skid plates attach to ZipWall heads, providing grip with a 6-inch by 3.5-inch footprint and 3/4-inch height
- Red/white colour improves visibility on dock
- Non-skid surface increases grip for safer footing
- ¾ in height adds traction without trip hazard
- 6 × 3½ in plates fit ZipWall heads directly
- Pair of plastic plates replaces worn parts fast
Replacement Non-Skid Plates
The ZipWall NSP2 pair supplies two plastic non-skid plates finished in red and white. Each plate measures three-quarters of an inch high by six inches long and three-and-a-half inches wide. They are designed as direct replacements for the standard plates fitted to a ZipWall head. The pack contains two pieces for immediate installation.
Sustained grip on smooth surfaces
The plastic construction maintains consistent friction against polished floors without the rapid wear seen in softer foam alternatives. Because the plates are rigid, they distribute the pole load evenly across the full six-inch length during extended shoring tasks. This prevents localised compression that would otherwise reduce holding power over a full work shift.
Simple drop-in mounting
The plates slot into the existing channels on a ZipWall head without tools or fasteners. Red and white colouring lets crew members confirm correct orientation at a glance in low-light conditions. Plastic material resists corrosion from moisture and cleaning chemicals common on marine docks. Replacing both plates together restores the original stability rating of the system.
How it compares
Measured against everything we stock in Dock Equipment & Drum Accessories, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 87% of the 271 comparable items (median $48.99).
Specifications
| Product | |
|---|---|
| Brand name | ZIPWALL |
Questions about this item
How much extra height do the 3/4-inch-thick plates add when they are mounted on the ZipWall head all day?
Each plate is 3/4 in thick, so the pair adds 3/4 in of total height to the head assembly.
Which ZipWall head models accept the 6-by-3-1/2-inch mounting footprint of these replacement plates?
The plates are designed for standard ZipWall heads that use the 6 in by 3-1/2 in non-skid plate pattern.
Will the red-and-white plastic plates grip a dusty concrete slab as well as the original plates did?
The moulded plastic surface provides the same non-skid texture as the factory plates for use on concrete or decking.
More in Dock Equipment & Drum Accessories
