Zoro Select O-Ring Viton 4-1/4 in 3/16 in Brown PK2
Pack of two Viton O-rings rated for -15 °F to 400 °F with FDA-approved material
- Viton material resists -15 °F to 400 °F
- FDA-approved compound suits food-contact uses
- 2 in actual ID fits 4-1/4 in nominal grooves
- 21 in actual width matches 3/16 in spec
- Pack of two provides ready spare
Zoro Select Viton O-Ring 4-1/4 in
This pack contains two brown Viton O-rings with a nominal inside diameter of 4-1/4 inches and a 3/16 inch cross-section. They suit maintenance tasks requiring fluoroelastomer seals in inch-measured grooves. The dash number 347 identifies the size for reordering.
Round cross-section Viton with 75A durometer
The medium-hard 75A durometer resists extrusion while sealing against metal surfaces in static or dynamic fits. Viton handles the stated temperature range of -15 to 400 degrees F and offers broad chemical resistance for automotive fluid systems. FDA-approved material allows use in food-contact equipment.
Metal-detectable but not X-ray detectable
These seals trigger metal-detection systems for contamination control yet remain invisible to X-ray inspection. Actual dimensions measure 4.2 inches inside diameter by 0.21 inch width, with a 4.645 inch outside diameter. California Proposition 65 warns of a chemical known to cause reproductive harm.
How it compares
Measured against everything we stock in Threadlockers & Sealants, at today’s prices. Recalculated every night.
- Price $12.99
- Pricier than about 55% of the 147 comparable items (median $11.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
What temperature range does the Viton O-ring handle?
The Viton material is rated for continuous use from minus 15 degrees Fahrenheit up to 400 degrees Fahrenheit.
What are the actual inside and outside diameters of this O-ring?
The actual inside diameter is 4.2 inches and the actual outside diameter is 4.645 inches.
Is any special tool or lubricant required to install these O-rings?
No special tool is required; clean the groove, apply a compatible lubricant, and press the ring in evenly to avoid twisting.
More in Threadlockers & Sealants
Similar items
Thread Lock Blue Medium Strength 50ml Anaerobic Sealer
- Blue ThreadLocker 5…
- 6.58 L x4.8 W x1.26…
Threadlocker Red High Strength 2 Pack 6ml Permanent Sealer
- High Strength, Perm…





