Zoro Select Viton O-Ring Dash 110 PK25
Viton O-rings in dash 110 size resist temperatures from -15 to 400 degrees Fahrenheit and come in a pack of 25
- Viton material resists chemicals up to 400 °F
- Medium-hard 75A durometer balances sealing and durability
- Pack of 25 covers multiple maintenance jobs
- Dash 110 square profile fits standard grooves
- Temperature range from -15 °F to 400 °F
Viton O-Ring Dash 110 Pack of 25
These black Viton O-rings come in a pack of 25 and carry dash number 110. They suit maintenance technicians and engineers who need a fluoroelastomer seal for oils, fuels and high-temperature fluids. The rectangular cross-section measures 0.103 in actual width by 0.3 in actual inside diameter. Buyers who need a different dash size or a non-Viton material should look elsewhere.
Sustained Temperature and Chemical Resistance
The compound is rated for continuous service from -15 to 400 degrees F and carries a 75A durometer hardness. Medium-hard Viton resists compression set during long exposure to heat and aggressive media better than softer elastomers. The seals are metal detectable but not X-ray detectable. They are not FDA compliant, so they cannot be used in direct food-contact applications.
Verify Groove Dimensions Before Ordering
Confirm that your groove matches the 0.568 in actual outside diameter and 0.103 in cross-section width. The nominal 3/8 in inside diameter and 3/32 in width are reference values only; actual dimensions control the fit. Ensure the operating environment stays within the stated temperature range and that metal detectability meets your inspection requirements.
How it compares
Measured against everything we stock in Threadlockers & Sealants, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 60% of the 147 comparable items (median $11.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
How much heat can these Viton O-rings handle during continuous use?
The material is rated for temperatures from -15°F up to 400°F, so they remain stable in hot running systems.
What groove dimensions do I need for a Dash 110 rectangular cross-section?
They require a nominal 3/8 in inside diameter and 3/32 in width groove; actual dimensions are .3 in ID and .103 in width.
Will these black 75A durometer rings seal against older steel flanges?
Yes, the medium-hard Viton material conforms to standard Dash 110 grooves on steel or iron surfaces.
More in Threadlockers & Sealants
