Zoro Select ZUSA-HT-1114 PVC Tubing Trap 1/2" ID x 5/8" OD 100 ft
Clear PVC tubing rated for food, beverage and water use with a 20 psi working pressure and 140 °F temperature limit
- Product colorClear
- Clear PVC lets you monitor flow visually
- Shore A 60 hardness keeps shape under 20 psi pressure
- Rated to 140 °F for hot beverage lines
- Peristaltic-pump compatible for metered dispensing
- 100 ft continuous coil reduces splice points
Product Identity
Zoro Select ZUSA-HT-1114 is clear PVC tubing sized at 1/2" inside diameter by 5/8" outside diameter and supplied in a 100 ft coil. It is manufactured to a Shore A 60 hardness for flexible handling in fluid-transfer tasks.
Suitable Uses and Limits
The tubing is rated for beverage, food and water contact, making it a fit for potable-water lines, drink dispensing or light-duty laboratory work. Buyers needing higher-pressure service, aggressive chemical resistance or operation above 140 Degrees F should look at alternative materials.
Capacity and Headroom
The 100 ft length provides long continuous runs without joints, while the 20 psi maximum pressure and 140 Degrees F temperature ceiling define the safe operating envelope. Peristaltic pump compatibility adds versatility for metered dosing, but the pressure limit restricts use in high-head or compressed-air systems.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $125.99
- Pricier than about 81% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Clear |
Questions about this item
What pump fittings do I need for the 1/2 in inside diameter and 5/8 in outside diameter tubing?
Use barbed or compression fittings sized for 1/2 in ID and 5/8 in OD PVC; the clear tubing has Shore A 60 hardness and handles up to 20 psi at 140 °F.
Can I connect this clear PVC line to existing poly or rubber hose on my beverage system?
Yes, match the 1/2 in ID and 5/8 in OD with compatible barbed fittings and clamps; the tubing is rated for food, beverage and water use at 20 psi.
How do I confirm the 100 ft coil is flowing correctly after installation?
Check for clear, steady flow without kinks or leaks at fittings; verify pressure stays below 20 psi and fluid temperature does not exceed 140 °F.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3104 60 62 Push-Fit Tee Fitting 3/8 in x 1/2 in Brass
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Viega ProPress 79680 adapter flange trap 1 in 200 psi 250 Degrees F
- Drain Components
- HAWA





