Stand Legs, Speaker Stands and Mounting Hardware

Stand legs are model-specific: match the number on the back

Manufacturer stand legs are cut to fit a model series, not a screen size. The listing names the TV models it was made for, and the neck width, screw length and screw thread differ between series, so legs from a 55-inch set of another generation can fail to fit. Read the model number from the label on the back of the TV, compare it with the compatibility list, and confirm that the screws are included.

Think about the furniture too. Legs set at the outer corners need a surface at least as wide as the spread, whereas a centered pedestal stand leaves room on the sides but can wobble on a narrow shelf. A soundbar under the screen also changes the height you need, so measure the gap between the table and the panel's bottom edge before you buy.

Speaker stands, brackets and wall mounts: weight, size and fixings

Speaker stands and brackets list the speaker sizes they accept, such as 4 to 7 inch models, and a maximum weight; stay well under both. Aim for tweeters near seated ear height. For wall mounts, the two numbers that count are the VESA hole pattern, measured in millimeters, and the maximum load, which must exceed the display's weight. Fix mounts into studs or solid masonry, since drywall alone will not hold a heavy screen.

Questions about Stand Legs, Speaker Stands and Mounting Hardware

Can I use stand legs from a different TV of the same size?

Usually not. Legs are made for a model series, and screw threads, neck width and hole positions vary. Match the full model number on your TV's back label to the compatibility list in the listing instead of relying on screen size or brand.

What does VESA mean on a wall mount?

VESA is the standard spacing of the four mounting holes on the back of a TV or monitor, written as horizontal by vertical millimeters, for example 200 x 200. The mount must support your TV's pattern and carry more than the TV's weight.

How tall should a speaker stand be?

Choose a height that puts the tweeter, the small driver at the top, roughly level with your ears when you sit. A stand that is too low aims the highs at your chest, and an adjustable model lets you fine-tune the height for your sofa.