Custodial Supplies and Trash Liners

Liner dimensions matter more than the gallon label

A gallon figure is only a rough match for the can. Measure the can's circumference and height: the flat width of a liner should be about half the circumference, and the length should cover the height plus half the base width plus an overhang to fold over the rim. Thickness is quoted in mils, one thousandth of an inch, and sharp or heavy waste calls for a higher figure. Thin high-density film suits light paper waste, while linear low-density film stretches around sharp objects rather than tearing.

Which mop, duster or pad suits the mess

Product form tells you the job. Dry dust mops, microfiber and feather dusters, and treated sheets lift loose dust without moving it around, damp pads and mop heads handle light film, and wet mops with a bucket and wringer deal with spills and floor chemicals. Cleaners split into all-purpose, bathroom and degreaser types, and strong ones come as concentrates or packets. Container lids, such as flat snap-on tops, are cut for one can size and shape, so match the lid to the can.

Questions about Custodial Supplies and Trash Liners

What is the difference between a duster and a dust mop?

A duster is for raised surfaces such as shelves, blinds and equipment; a dust mop sweeps loose dust and grit from floors. Both trap dust best when used dry, so use a damp mop afterwards for sticky residue.

How strong a liner do I need for a heavy bin?

Heavier or sharper waste needs more thickness in mils and a tougher film type. A thin liner may be fine for paper in an office bin, but bottles, cartons and wet kitchen waste can tear it, so step up in thickness.

Can I use disinfecting wipes instead of a cleaner?

Wipes are handy for touch points, but they are not a substitute for removing heavy soil first. Wipe off dirt, then use the disinfectant wipe and keep the surface visibly wet for the contact time on the canister.