Nippon Labs DVI 6 DD 6 ft DVI-D Dual Link Male to Male Cable
- 6 ft (1.83 m)
- DVI-D to DVI-D
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6 ft DVI-D dual-link cable with 19-pin male connectors on both ends, copper conductors and nickel-plated contacts for a 9.9 Gbit/s digital video link
This 6 ft DVI-D dual-link cable carries digital video between monitors, projectors or legacy players. Two 19-pin male connectors plug directly into compatible ports without adapters. Shielded copper conductors and nickel-plated contacts preserve signal integrity over the full length. It suits offices and home setups that still rely on DVI-D dual-link outputs.
Aluminium Mylar foil wraps the 28 AWG copper conductors to block electromagnetic interference. The PVC jacket protects the cable during routing behind desks or through trunking. Passive construction draws no external power and adds no audible noise. Signal loss stays low thanks to the nickel-plated connectors and quality shielding.
The dual-link design supports a digital interface up to 9.9 Gbits per second, enabling higher resolutions than single-link cables. Nickel-plated contacts resist corrosion for a stable connection over time. No software or drivers are required; the cable works immediately on any device with a DVI-D dual-link port. It does not carry audio or convert to other video standards.
Measured against everything we stock in DVI Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 4xem |
| Model name | 4XDVIDMM6 ft |
| Product type | DVI Cables |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Connector on First End: 1 × 19-pin DVI Male Digital Video Connector on Second End: 1 × 19-pin DVI Male Digital Video |
| Connector gender | Male to Male |
| Size & build | |
| Cable length | 6 ft (1.83 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Shipping weight | 0.10 kg |
| Package size | 216 × 127 × 25 mm |
Align the 19-pin DVI-D male connectors with the ports on your monitor and video device, then secure each side using the built-in thumbscrews; the step often missed is tightening both screws evenly to prevent signal loss from a loose fit.
The 28 AWG copper conductors and nickel-plated 19-pin connectors are designed for long-term use; inspect the PVC jacket and aluminum Mylar foil shielding periodically for physical damage, and replace the cable only if the connectors become bent or the jacket shows cuts.
The 9.9 Gbits per second digital interface rating is the primary sustained-use limit; signal integrity depends on the 28 AWG copper conductors and dual-link 19-pin design maintaining that bandwidth without degradation over the 6 ft length.
More in DVI Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?