SXDOOL PCI-E 6Pin to 3 x DC 5.5 x 2.5mm Power Adapter Cord 12V 18AWG 1M
- Case Fan Accessory
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 5V USB to 12V DC up to 2A via 5.5×2.1mm plug with ten interchangeable tips, 3.3FT
This 3.3FT cable converts a standard 5V USB port into a 12V DC 5.5 x 2.1mm output with a maximum 2A current. It ships with 10 interchangeable connectors covering sizes from 2.5 x 0.7mm up to 5.5 x 2.5mm plus Micro-USB, Type-C, Mini USB and LED terminals. The adapter suits users who need to power 12V peripherals such as routers, LED strips, cameras or audio gear from a USB power bank or wall charger.
The single USB-A input plugs into any 5V source capable of delivering sufficient current for the 12V 2A maximum output. Ten swappable tips eliminate the need to stock multiple dedicated wall warts for devices using 3.0 x 1.1mm, 3.5 x 1.35mm, 4.0 x 1.7mm or 4.8 x 1.7mm barrels. Select the matching connector for each device and the cable handles the voltage step-up internally.
Passive electronics inside the moulded USB head perform the 5V-to-12V conversion without a fan, so operation is silent. The unit draws only the input current required by the connected load up to the 2A output ceiling, keeping heat minimal during typical use with routers, speakers or LED lighting. No active cooling or external power brick is involved.
Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | 759549564381 |
The cable supports up to 2A output at 12V, compatible with devices drawing 1.75A, 1.5A, 1A, 0.7A, 0.5A and 0.3A.
The product is a passive cable assembly with no active electronics; it carries the current supplied by the USB power source to the selected connector.
A standard USB port or charger supplying 5V input is required; the cable converts that to 12V DC at the 5.5 x 2.1mm plug.
More in Jumper & Adapter Power Cords
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?