We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 ECC registered DIMMs, 240-pin, 1.5V, 32GB kit

A-Tech

A-Tech 32GB 4x8GB DDR3 1066 ECC RDIMM 4Rx8 Server RAM

SKU CH-TAPF-WRGPV

A 32 GB DDR3 1066 MHz ECC registered quad-channel kit with four 8 GB modules, 4Rx8 organisation, 1.5 V operation and 240-pin DIMM form factor for server and workstation upgrades

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR3 1066 (PC3 8500)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL7
  • Rated voltage1.5 V
  • Buffer typeRegistered

Capacity 32GB (4 x 8GB)

Speed DDR3 1066 (PC3 8500)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1066 MHz speed handles demanding workloads efficiently
  • ECC registered design detects and corrects data errors
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin DIMM form factor fits compatible server and workstation slots

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1066 MHz registered ECC DIMMs built for servers and workstations that require quad-rank modules. Each stick runs at the standard 1.5 V DDR3 voltage and uses a 240-pin form factor. The kit is not compatible with desktop or laptop computers.

Thermals and power in normal use

Registered DDR3 modules operating at 1.5 V draw modest power and produce low heat under typical server workloads. The quad-rank organisation does not increase voltage, so thermal output remains comparable to standard registered DIMMs. No active cooling is required beyond normal chassis airflow.

Quad-rank registered ECC constraint

The 4Rx8 organisation means each module presents four logical ranks to the memory controller. Only systems whose BIOS and chipset explicitly support quad-rank registered ECC DIMMs can use this kit. Verify the platform documentation before purchase.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $64.99
Cheaper than about 79% of the 6,523 comparable items (median $188.99).
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 6,064 items is 32 GB.
Price per GB $2.03 per GB
Cheaper than about 93% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineA-Tech DDR3 Server Memory RAM
Model nameA-Tech 8 GB 4Rx8 PC3-8500R
Total capacity32 GB (4 × 8 GB)
Performance
Rated speedDDR3 1066 (PC3 8500)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL7
ECC supportYes
Buffer typeRegistered
Memory rank4Rx8
Kit configurationQuad Channel Kit
Power
Rated voltage1.5 V

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 4Rx8 DDR3 1066 registered DIMMs into the 240-pin slots?

Power down the server, open the chassis, align each module's notch with the 240-pin DDR3 slot key, press firmly until the retention clips snap shut, then populate all four channels per the system manual for quad-channel operation.

Will the 1.5V DDR3 ECC RDIMMs need replacement after a certain period?

The modules are built with major-brand chips and tested for lifetime reliability; no scheduled replacement is required unless a module fails, in which case the lifetime warranty covers it.

At what point does the CL7 latency limit sustained throughput on heavy workloads?

CL7 timing at 1066 MHz sets the baseline access latency; under continuous heavy loads the memory controller's bandwidth ceiling is reached before latency becomes the primary bottleneck.

More in ECC Server RAM

Similar items