We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray epoxy putty in a 16 oz metal pail

ABATRON

ABATRON FEBO#K Putty 16 oz Pail Gray

SKU CH-SQVC-2T09H

Epoxy putty in a 16 oz pail bonds metal, fiberglass, ceramic and glass, cures in two days and withstands 50 to 100 °F service temperatures

  • Epoxy putty bonds metal, ceramic, fiberglass and glass
  • 16 oz pail provides enough material for multiple repairs
  • Works between 50 and 100 degrees F for reliable curing
  • Nonshrinking formula keeps shape and strength after full cure
  • Paintable finish lets you match surrounding surfaces

Epoxy Putty for Metal Repair

ABATRON FEBO#K Putty is a two-part epoxy putty supplied in a 16 oz pail. It bonds to metal, ceramic, fiberglass and glass for structural repairs and rebuilding worn surfaces. The gray compound is paintable after cure and resists shrinkage during hardening. It suits maintenance technicians and fabricators who need a machinable, wear-resistant filler.

Working Time and Cure Profile

The putty provides a working time of 1 hr at room temperature, allowing shaping and tooling before the exothermic reaction sets the mass. Full cure completes in 2 day, developing maximum mechanical strength for load-bearing areas. Performance is rated between 50 and 100 Degrees F, so application outside this window may reduce bond quality or extend cure. Plan repairs to accommodate the multi-day hardening schedule.

Thermal Limits and Safety Margin

The cured epoxy withstands continuous service up to 100 Degrees F without softening, making it suitable for ambient-temperature equipment and enclosures. Its flash point is 245 Degrees F, indicating a wide margin above normal operating heat and reducing fire-risk during storage or hot-work proximity. The formulation is nonshrinking and wear resistant, maintaining dimensional stability through thermal cycles within the rated range.

How it compares

Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.

Price $33.99
Pricier than about 71% of the 631 comparable items (median $16.99).

Specifications

Product
Brand nameABATRON

Questions about this item

Will the 16 oz pail generate noticeable heat or fumes during a full-day application?

The epoxy putty has a flash point of 245 °F and cures at room temperature, so it stays cool and produces minimal odor while you work.

What surface preparation tools do I need before applying the gray putty?

Clean the metal, fiberglass, glass or ceramic area to bare substrate, roughen it lightly, then mix the two-part epoxy directly in the pail — no special equipment required.

Can I use this putty on a vintage cast-iron part that sees temperatures below 50 °F?

The product is rated for continuous performance down to 50 °F; below that temperature the cured bond may lose its rated strength.

More in Caulking & Sealing Supplies

Similar items