Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A compact bookshelf pair with two 3″ woofers and a 1″ soft-dome tweeter, rated 70 Hz–20 kHz at 92 dB and 20–200 W per channel
The Acoustic Audio AA35CB is a two-speaker passive set designed for indoor stereo or surround installations. Each cabinet houses two 3" polypropylene woofers and a 1" soft dome tweeter in a sealed ABS enclosure. The system handles up to 800 watts peak power and delivers a 70Hz-20 kHz frequency response at 92dB sensitivity. These speakers suit home theatre, whole-house audio or commercial background music systems.
Your amplifier or receiver must provide raw speaker wire outputs with 20 to 200 watts per channel into 8 ohms. Verify you have CL3-rated or standard raw speaker cable for the connection. The spring-loaded terminals accept bare wire only, so banana plugs or spades cannot be used. Confirm your existing gear meets the minimum power requirement before ordering.
The black ABS sealed cabinets measure 4.125" high by 9.625" wide by 3.875" deep each, allowing discreet shelf or stand placement. Spring-loaded raw wire connectors make initial wiring fast but require a secure twist for long-term reliability. The sealed alignment avoids port noise but limits deep bass extension below 70Hz. Not rated for outdoor or damp environments.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | Center Channel Speaker |
The box contains two passive speakers and an instruction manual. You must supply CL3 or raw speaker wire and an amplifier or receiver with raw speaker wire outputs.
The 800 W figure is a system peak rating. Each speaker is designed for 20 to 200 watts per channel from your amplifier, so choose an amp within that range.
With 92 dB sensitivity at 8 ohms and a 70 Hz–20 kHz response, a 100 W per channel amp will drive them to strong listening levels in small to medium rooms.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?