Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three in-ceiling speakers with 5.25" woofers and 12mm tweeters deliver 45Hz–22kHz response and install via a hardware-free Pressure Lock system
This three-piece flush-mount system places a centre channel alongside left and right speakers for home-theatre audio. Each unit uses a two-way design with a 5.25-inch polypropylene woofer and a 12mm soft-dome tweeter. Passive construction means they draw power directly from your receiver or amplifier. Durable ABS housings and paintable grilles blend into any ceiling or wall.
Builders wanting a low-profile 6.61-inch cut-out and 2.8-inch mounting depth will appreciate the tool-free Pressure Lock clamps. The set suits new-build or retrofit projects where a traditional wired surround layout is planned. Buyers needing powered speakers, Bluetooth streaming or a subwoofer included should consider other configurations. The 100-watt upper power limit also rules out very high-output amplifiers.
At 95dB sensitivity and 8-ohm impedance, the speakers deliver full-range coverage for dialogue, music and effects at typical listening levels. The 5.25-inch woofers provide adequate bass down to 45Hz, though deep sub-bass extension is not claimed. Headroom is sufficient for medium-sized rooms driven by a compatible receiver. Larger spaces demanding reference-level output may require additional amplification or a dedicated subwoofer.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
Your receiver or amplifier must supply between 10 and 200 watts per channel into 8 ohms; anything outside that range is not recommended.
Each speaker requires a round hole of exactly 6.61 inches and a clear cavity depth of at least 2.8 inches; the Pressure Lock Mounting System then clamps to the drywall without extra hardware.
Play program material and confirm clear, full-range output from 45 Hz to 22 kHz with the 95 dB sensitivity at 8 ohms; the 5.25-inch woofers and 12 mm soft-dome tweeters should blend smoothly without distortion at normal listening levels.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?