Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five in-ceiling speakers with 5.25" woofers and 12mm tweeters covering 45Hz-22kHz at 95dB, flush-mounting in 6.61" holes with a 2.8" depth
The Acoustic Audio R191 is a five-piece flush-mount speaker system designed for home-theatre surround sound. Each unit uses a 5.25-inch polypropylene woofer paired with a 12mm soft-dome tweeter in a two-way configuration. The set covers front, centre and rear channels for immersive audio. Paintable grilles and ABS housings blend with any ceiling finish.
This system replaces built-in television speakers or simple soundbars that cannot deliver true channel separation. The jump is worthwhile when a receiver or amplifier with raw speaker-wire outputs is already available or planned. Passive design means no separate power outlets are needed at each speaker location. Installation uses a pressure-lock mechanism that clamps to drywall without extra hardware.
Frequency response spans 45 Hz to 22 kHz at 95 dB sensitivity and 8-ohm impedance, giving clear dialogue and detailed effects in medium-sized rooms. Amplifier power between 10 and 200 watts per channel is supported for clean headroom. The speakers fit a 6.61-inch cut-out with 2.8-inch mounting depth. They cannot produce sub-bass impact below 45 Hz or serve large auditorium spaces.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
Each speaker fits a 6.61" round hole and needs 2.8" of mounting depth behind the ceiling.
The system clamps the speaker to drywall without hardware; the step often missed is tightening the clamps evenly so the grill sits flush.
Use CL3-rated in-wall speaker wire and an amplifier delivering 10 to 200 watts per channel at 8 ohms.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?