Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four in-ceiling speakers deliver 45 Hz–22 kHz frequency response with 5.25″ woofers and 12 mm tweeters, mounting flush via a pressure-lock system that needs no hardware
The Acoustic Audio R191 pack contains four flush-mount speakers built for home theatre surround or whole-house audio. Each unit uses a traditional passive design that draws power from your existing receiver or amplifier. The 2-way configuration pairs a 5.25" polypropylene cone woofer with a 12mm soft dome tweeter for full-range coverage. Durable ABS housings and removable grilles can be painted to match any décor.
Your receiver or amplifier must supply between 10 and 200 watts per channel into an 8-ohm load. Only raw speaker wire outputs are supported, so confirm your equipment provides bare-wire terminals. Use CL3-rated in-wall speaker cable for the runs from the amplifier to each ceiling location. The speakers accept raw wire clamp or solder connections, so no proprietary plugs are required.
The Pressure Lock Mounting System clamps the speaker to drywall without separate hardware, requiring a round cut-out of 6.61" and a mounting depth of 2.8". Overall speaker diameter is 7.48", so verify ceiling cavity clearance before cutting. Frequency response spans 45Hz to 22 kHz at 95dB sensitivity, delivering wide sound dispersion from the low-profile housing.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | In-Ceiling Speakers |
The pack contains four in-ceiling speakers with removable grilles. You must supply a home audio receiver or amplifier with raw speaker wire outputs, 10–200 watts per channel, and CL3-rated speaker wire for the runs.
This model is sold only as a single 2-pair pack of four identical speakers; there are no alternate versions or capacity options to select.
At 8 ohms the speakers produce 95 dB output with one watt input, so a modest 10-watt-per-channel receiver can reach loud listening levels without strain.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?