We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
aFe Power digital clamp meter with backlit display and test leads

aFe Power Digital Clamp Meter 1000A 6000 Counts TRMS VFD LOZ NCV Backlight

SKU CH-A776-FMEXX

Measures AC/DC current to 1000A with true-RMS accuracy, VFD and LoZ modes, plus NCV detection and backlit display

  • Team affiliation1 Piece
  • Key featuresClamp Meter, Test Leads, Thermocouples, Batteries, Manual, B
  • Overall height28.5 L x 6.2 W x 13.7 H centimeters
  • Overall width28.5 L x 6.2 W x 13.7 H centimeters
  • Overall length28.5 L x 6.2 W x 13.7 H centimeters
  • Product typeClamp
  • Accurate readings with true-RMS 1000 A AC/DC clamp measurement
  • Diagnose motor-start faults using 100 ms inrush current capture above 10 A
  • Detect live conductors safely via built-in NCV sensor and integrated flashlight
  • Eliminate ghost voltages and filter drive noise with LoZ and VFD modes
  • Rated IEC 61010-1 CAT IV 600 V / CAT III 1000 V for industrial safety

True-RMS Clamp Meter for 1000A Work

The aFe Power clamp meter measures AC/DC current to 1000A and voltage to 1000V DC or 750V AC with a 6000-count display. It adds resistance, capacitance, frequency, duty cycle, diode test, continuity and temperature via thermocouple. Technicians in labs, factories or households use it for general electrical troubleshooting.

CAT IV 600V Safety and VFD Filtering

Safety rating follows IEC 61010-1 with CAT IV 600V and CAT III 1000V protection and double insulation. The Variable Frequency Drive filter and Low Impedance mode improve accuracy on noisy drive outputs and ghost voltages. Inrush current capture works only on AC above 10A with a 100ms measurement window.

Clamp Operation with NCV and Backlight

Open the jaw around a single conductor for current readings without breaking the circuit. Non-contact voltage detection flags live wires, while the flashlight and backlit screen help in dim areas. Test leads and thermocouple are included. Common errors come from clamping multiple wires or using the inrush function on DC circuits.

How it compares

Measured against everything we stock in Multimeters & Electrical Testers, at today’s prices. Recalculated every night.

Price $114.99
Pricier than about 90% of the 971 comparable items (median $30.99).

Specifications

Product
Brand nameaFe Power
Product typeClamp
Size & build
Overall height28.5 L x 6.2 W x 13.7 H centimeters
Overall width28.5 L x 6.2 W x 13.7 H centimeters
Overall length28.5 L x 6.2 W x 13.7 H centimeters
More details
Team affiliation1 Piece

Questions about this item

Should I choose the HT208F or HT208D model for 1000A AC/DC current and 6000 counts?

Both HT208F and HT208D support 1000A AC/DC current and a 6000 count display. They share identical voltage, current, and resistance ranges listed in the specifications.

What does the 1000A rating mean when I clamp onto a live conductor?

The clamp can measure up to 1000A AC or DC through the jaw without breaking the circuit. True-RMS gives accurate readings on non-sinusoidal waveforms.

How do the CAT IV 600V and CAT III 1000V ratings limit where I can use this meter?

CAT IV 600V covers origin-of-installation and outdoor conductors up to 600V. CAT III 1000V covers fixed building wiring up to 1000V. Both ratings follow IEC 61010-1.

More in Multimeters & Electrical Testers

Similar items