aibileec 12" ATX 24-Pin to 6-Pin PSU Power Splitter Cord 18AWG
Converts a standard ATX 24-pin supply to a 6-pin connector for HP Z220, Z230, Z240 and EliteDesk 800 systems using 18 AWG copper wire
- Overall length1 ft (0.3 m)
- Converts standard ATX 24-pin PSU to HP 6-pin mainboard power
- 12-inch 18AWG copper cable keeps voltage drop low
- Compatible with HP Z220 Z230 Z240 EliteDesk 800 Compaq 6200 Pro MT
- Pre-wired 24-pin female to dual 6-pin PCIe connectors
- Each unit tested for continuity before shipment
HP Workstation Power Adapter
This 12 inch ATX 24-pin to 6-pin splitter cable lets a standard power supply feed HP Z220, Z230, Z240 and EliteDesk 800 systems. It bridges the proprietary mainboard connector found on those workstations. Builders upgrading or replacing PSUs in compatible HP units are the target users.
Installation Notes
The cable plugs directly between an ATX 24-pin source and the 6-pin motherboard header using 18AWG 1007 copper conductors. Pin rearrangement is required for HP Elite 8000, 8100, 8200, 8300 and 800 G1 models before the adapter will function. Incorrect pin mapping on those platforms prevents the system from powering on.
Length and Compatibility Limits
At 30 cm the cord only reaches adjacent PSU and motherboard positions inside compact chassis. It supports the listed HP desktops and Compaq 6200 Pro MT but cannot serve boards that retain a full 24-pin ATX socket or demand auxiliary CPU power not carried by the 6-pin link.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 92% of the 433 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Overall length | 1 ft (0.3 m) |
Questions about this item
How do I confirm the 24-pin to 6-pin adapter is working after connecting it to my HP Z230?
The system should power on normally and reach the operating system without shutdowns or POST errors, indicating the 18AWG cable is delivering power correctly through the 6-pin motherboard connector.
What comes in the package and do I need any extra cables for the HP Z220?
The box contains one 12-inch power splitter cord with a 24-pin female ATX connector and a dual 6-pin PCI-E plug; no additional cables are required for the listed HP models.
Which version of this adapter should I choose for an HP EliteDesk 800 versus a Z240?
The same 12-inch 18AWG cable fits both the EliteDesk 800 and the Z240 because both use the proprietary 6-pin mainboard connector that this splitter provides.
More in Y-Splitter Power Cables
Similar items
EN-Labs PWMSPL212 PWM fan splitter cable 10 in 2 pack
- Cable Splitters
- Black
SXDOOL 16 AWG 8-Pin to Dual 8-Pin (6+2) Power Splitter Cord 30.5 cm 4-Pack
- Case Fan Accessory
Cable Matters 4 Pin PWM Fan Splitter 2 Pcs 1 to 3 11 Inch Black
- DVI to DVI
- Female to Female
SXDOOL KZ5387 6-pin to dual 6+2-pin power splitter cord 5pcs 20cm 18AWG
- Case Fan Accessory
EN-Labs PCIE6PSPL8P15CM PCIe 6-pin to Dual 8-pin Power Splitter Cord 6 Inches
- 6.1 in (15.5 cm)
- 2 x PCIe 8pin(6+2)…





