Pioneer TS-G1620F 6.5" 300W 2-Way Coaxial Car Speaker
- 6.5 in (16.5 cm)
- Coaxial
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Bundle pairs 6.5" component and coaxial speakers delivering 45 W and 40 W RMS across 60 Hz to 20 kHz
This bundle pairs a set of Alpine SXE-1751S 6.5" 2-way component speakers with a set of Alpine SXE-1726S 6.5" 2-way coaxial speakers. A pry kit and a Creative Audio coozy are also included. The component pair uses separate woofers and neodymium tweeters for flexible staging, while the coaxial pair integrates its tweeter for simpler placement. Both designs share a 4-ohm nominal impedance.
The component speakers handle 45 watts RMS and 280 watts peak, while the coaxial speakers handle 40 watts RMS and 220 watts peak. Both types cover a 60 Hz to 20 kHz frequency response. Amplifier output should stay near the RMS figures for clean, sustained output; the peak ratings only reflect short-term thermal limits. Exceeding continuous power risks voice-coil damage on either model.
This bundle replaces factory speakers that typically use paper cones and smaller magnets with ferrite woofers, Kapton voice coils and neodymium tweeters. The jump is worthwhile when the head unit or an external amplifier can deliver clean power near the 40 to 45 watt RMS range. Vehicles without amplification or with very limited mounting depth will not realise the full benefit of the separate component tweeters.
Measured against everything we stock in Car Stereo Speakers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Speaker |
The SXE-1751S component set with separate tweeters suits front doors for better imaging, while the SXE-1726S coaxial pair fits rear locations where a single mounting point is available.
It means the component speakers can handle 45 watts of continuous amplifier power without overheating, so an amp delivering around 45 W per channel matches them well.
Both pairs present a 4-ohm load per channel, so they connect directly to any standard car amplifier or head-unit output rated for 4 ohms.
More in Car Stereo Speakers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?