Antronix CMC2004H 3-Pack 4-Way Horizontal Splitter 7dB 5-1002 MHz

Three-pack of 4-way horizontal splitters

This Antronix CMC2004H bundle supplies three identical 4-way horizontal splitters for coaxial distribution networks. Each unit divides a single incoming signal across four output ports with a nominal 7 dB insertion loss. The 5-1002 MHz bandwidth supports current digital broadcast, HDTV and two-way multimedia services. Installers or system integrators expanding a head-end or NID enclosure use these to feed multiple outlets from one trunk line.

Zinc alloy housing with nickel alloy plating

The die-cast zinc alloy body and backplate carry a proprietary nickel alloy finish that resists corrosion at the rear of the housing where moisture collects. Factory-sealed F-type ports sit on 1-inch centres and meet SCTE compliance with a flat 15 psi seal that blocks water migration and maintains a solid ground path. Every port survives repeated 6 kV ring-wave surges while the internal ferrites stay ultra-linear, so the splitters keep performing after lightning events or power crosses.

5-1002 MHz bandwidth with low insertion loss

The flat 1 GHz passband carries forward-path video, data and telephony plus the return-path frequencies needed for cable modem upstream transmission. Low inter-modulation design and optimised return-band isolation prevent high-level modem signals from degrading forward QPSK and QAM channels. The 7 dB per-port loss suits typical drop lengths; runs with excessive attenuation or installations needing more than four outlets per trunk will require additional amplification or a different tap value.