Anvil 0310519608 reducing tee 1/2" x 1/2" x 1/4" malleable iron Class 300 FNPT
Malleable iron reducing tee connects 1/2" and 1/4" FNPT lines at Class 300 pressure rating
- Product typeDrain Components
- Reduces pipe size while handling 2000 psi at 150 °F
- Class 300 malleable iron rated for 300 psi saturated steam at 550 °F
- FM approved and UL listed meeting ASME B 16.3 standards
- FNPT threads connect 1/2" and 1/4" pipe without adapters
- Operates from -20 °F to 550 °F for broad temperature range
Product identity
The Anvil 0310519608 is a malleable iron reducing tee designed for plumbing and industrial piping systems. It connects three pipe sections with female National Pipe Taper threads. The fitting suits installers and maintenance crews who need a durable branch connection in high-pressure service.
Critical specification
This tee provides a 1/2 in x 1/2 in x 1/4 in branch reduction in a single Class 300 fitting. It is rated for 2000 psi at 150 degrees F and 300 psi saturated steam at 550 degrees F, with a service range from -20 to 550 degrees F.
Build integration
The FNPT threads accept standard male pipe threads without welding or soldering. AAR, FM and UL listings plus ASME B16.3 compliance mean it meets common code requirements for steam, water, oil and gas lines. The malleable iron body resists mechanical shock and vibration in rigid piping layouts.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 60% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0310519608 |
| Product type | Drain Components |
Questions about this item
What does the 2000 psi rating mean when the fitting is installed in a system?
It indicates the maximum non-shock working pressure the tee can handle at 150 °F, per its Class 300 rating.
How does the FNPT connection affect what pipe I can thread into it?
Female National Pipe Taper threads accept matching male NPT pipe or nipples; the taper creates a seal when tightened with thread sealant.
What clearance do I need to install this 1/2" x 1/2" x 1/4" reducing tee?
The tee measures roughly 1 1/2 inches centre-to-face on the 1/2" runs and 1 1/4 inches on the 1/4" branch; allow extra space for wrench access.
More in Drain Stoppers, Strainers & Traps
Similar items
Dynaquip Controls
Dynaquip Controls VLE2.NK 1/4 Manual 2-Way Ball Valve trap
- Drain Components
- HAWA
$22.99
0.00028035BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.0001706BTC
In stock
Cherne
Cherne 270032 Test Ball Plug 5.25 in Deflated Length
- Drain Components
- HAWA
$22.99
0.00028035BTC
In stock