Aomoproing DisplayPort 1.4 fiber optic cable 16ft
A unidirectional fibre-optic DisplayPort 1.4 cable carrying 8K at 60 Hz, 4K at 144 Hz and HDR over 16 ft for gaming monitors and VR headsets
Cable Length 50 Feet
- 8K 60Hz clarity for immersive detail
- 4K 240Hz speed for fluid motion
- 4 Gbps bandwidth drives peak GPU output
- DSC 1.2 compression preserves visual fidelity
- 16 ft fiber reach fits large setups
Unidirectional Fiber Optic DisplayPort 1.4 Cable
This unidirectional fiber optic cable carries DisplayPort 1.4 signals over 16ft. It supports HBR3 bandwidth of 32.4 Gbps and Display Stream Compression 1.2. The link handles 8K at 60Hz, 4K at 144Hz or 240Hz, and HDR for gaming monitors and VR headsets.
Replacing copper DisplayPort cables limited
Copper cables often lose signal integrity beyond short runs, causing flicker or resolution drops. This fiber optic design maintains full 32.4 Gbps bandwidth at 16ft without repeaters. The upgrade is worth it when the source and display are separated by distance that copper cannot bridge reliably.
Drives 8K 60Hz and 4K 240Hz with HDR headroom
The cable comfortably handles 7680x3840 at 60Hz and 3840x2160 at 240Hz with Dynamic HDR. It also supports 3440x1440 and 2550x1440 at 60Hz. Bandwidth runs out above 32.4 Gbps, so higher uncompressed resolutions or refresh rates beyond the listed modes are not supported.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $55.99
- Pricier than about 84% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing DisplayPort cable 50ft DP 1.4 32.4 Gbps 8K@60Hz 4K@144Hz
Aomoproing DisplayPort Cable 1.4 65ft 32.4 Gbps 8K@60Hz 4K@144Hz
Questions about this item
What length is the Aomoproing DisplayPort 1.4 fiber optic cable?
This cable measures 16 ft from connector to connector, giving ample reach for desktop-to-monitor runs without excess slack.
Which connector end plugs into the graphics card and which goes to the display?
The cable is unidirectional; the end marked Source connects to the GPU output while the Display end connects to the monitor input — reversing them will result in no signal.
Does the fiber construction require any special care or periodic replacement?
No scheduled maintenance is needed; the optical cores are sealed inside the jacket, so the cable simply works until physical damage occurs, at which point it is replaced as a unit.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A077 DisplayPort 1.4 cable 50 ft
- 50 ft (15.2 m)
- DisplayPort
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
Jansicotek TJ-A022 50 ft DisplayPort 1.4 fiber optic cable
- 50 ft (15.2 m)
- DisplayPort
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
LUOM 66 ft DP 1.4 optical fiber displayport cable 8K 60Hz 4K 144Hz 32.4Gbps in-wall
- 66 ft (20.1 m)
- DisplayPort










