Aomoproing DisplayPort 2.1 cable 80 Gbps 6.6 ft
Transmits 80 Gbps DisplayPort 2.1 signals up to 16K at 60 Hz or 4K at 240 Hz over 6.6 ft with aluminium shells rated for 15,000 bends
- Supports 16K at 60 Hz via 80 Gbps DisplayPort 2.1 bandwidth
- 4K at 240 Hz and 2K at 360 Hz for ultra-smooth gaming motion
- Dynamic HDR 4:4:4 and HDR10 with HDCP 2.2 for vivid colour depth
- Premium aluminium shell dissipates heat during extended sessions
- 15,000-plus bend lifespan with 28 AWG oxygen-free copper conductors
80 Gbps DisplayPort 2.1 cable
This 6.6 ft DisplayPort 2.1 cable carries an 80 Gbps signal and supports resolutions up to 16K at 60 Hz. It also handles 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz. The 28 AWG oxygen-free copper conductors and aluminium shell resist EMI and tolerate over 15,000 bends.
Competitive gamers and HDR video editors
The cable suits competitive gamers who need 4K at high refresh rates and editors who require Dynamic HDR 4:4:4 and HDCP 2.2. Buyers who need a longer run for a projector install should look at an active optical alternative. Users with only DisplayPort 1.4 ports will not unlock the 80 Gbps bandwidth.
Fits standard DisplayPort ports
The male-to-male connectors plug directly into GPU and monitor ports without adapters. DSC 1.2a support lets the link compress visually lossless streams, freeing bandwidth for higher refresh rates. The aluminium housing dissipates heat during sustained high-speed signalling. The 6.6 ft length reaches most desk-mounted displays without excess slack.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing USB C to USB C cable 100W 3.3ft right angle blue
- Blue
Aomoproing Mini DisplayPort to DisplayPort 1.4 Cable 3.3ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps
Questions about this item
Do I need a graphics card and monitor that both have DisplayPort 2.1 ports to use this cable?
Yes, both the source and the display must provide DisplayPort 2.1 connectors to reach the cable's 80 Gbps rating and supported modes such as 16K at 60 Hz or 4K at 240 Hz.
Will this cable still carry a signal if I connect it to an older DisplayPort 1.4 monitor?
The cable is backward compatible and will transmit video at the maximum rate the older port allows, such as 4K at 144 Hz or 1080p at 240 Hz, but it cannot exceed the 1.4 link bandwidth.
How can I verify the cable is delivering 80 Gbps after I plug it in?
Open your GPU control panel or monitor OSD and confirm the active link shows UHBR 10 or 80 Gbps, then check that the selected resolution and refresh rate match a 2.1-only mode like 4K at 240 Hz or 8K at 60 Hz.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A285 DisplayPort 2.0 cable 3.3 ft green 80 Gbps 16K@60Hz
- 3.3 ft (1.01 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort 1.4 cable 6.6 ft 8K@60Hz 4K@144Hz HBR3 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE TJ-A028 DisplayPort 1.4 extension cable 6.6 ft 8K@60Hz 4K@144Hz 2K@240Hz 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable










