Apollo 77VLF14801 Manual 2-Way Ball Valve Press Brass
Manual two-way brass ball valve with full-port stainless ball rated to 300 psi water pressure
- Full-port design ensures unrestricted water flow
- Brass body resists corrosion in plumbing systems
- Stainless steel ball provides durable sealing
- Rated for 300 psi operating pressure
- Lever handle allows quick manual operation
Apollo 77VLF14801 Press Ball Valve
This Apollo 77VLF14801 is a manual two-way ball valve built from brass with a stainless steel ball. It uses a press connection for a 2 in nominal pipe size and offers a full port design. The valve handles water media at up to 300 psi operating pressure and 15 psi steam pressure. It carries a vacuum service rating of 29 in Hg and meets California Proposition 65 requirements.
Suitable for water and vacuum lines needing full
Installers working on potable water or vacuum systems up to 300 psi will find this valve fits press-fit copper or stainless piping. The non-locking lever handle allows quick manual operation. It is not rated for combustible gas service or 3-A sanitary standards, so buyers needing gas approval or high-purity certification should look elsewhere. The two-piece body also limits inline maintenance compared to three-piece designs.
Press installation requires compatible tool and jaws
The press ends demand a dedicated press tool with correctly sized jaws for a 2 in connection; mismatched jaws are the most common cause of leaks. Ensure tubing is cut square, deburred and marked to the proper insertion depth before pressing. The valve ships ready to install without disassembly, but dirt on the sealing element or an incomplete press cycle will compromise the joint.
How it compares
Measured against everything we stock in Faucet Valves & Replacement Parts, at today’s prices. Recalculated every night.
- Price $241.99
- Pricier than about 83% of the 1,132 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Brand name | APOLLO |
| Product type | Other |
Questions about this item
What plumbing connections must already be in place for the 2 in press-fit valve to install?
The valve needs a 2 in straight pipe run prepared for press connections, rated for at least 300 psi water service and compatible with brass and stainless-steel components.
Will the full-port stainless-steel ball create flow restriction when paired with older reduced-bore piping?
The full-port design matches the nominal 2 in bore, so it will not add restriction beyond what the existing pipe already provides.
How can I verify the valve is working as intended after pressing it onto the line?
Pressurise the system to its working pressure, cycle the lever handle fully open and closed, and confirm zero leakage at the press joints while the handle moves smoothly.
More in Faucet Valves & Replacement Parts
