ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
LGA 1151 server board with Intel C232 chipset, four DDR4 ECC slots up to 64 GB, dual Gigabit LAN, IPMI 2.0, four SATA3 ports with RAID.
The ASRock Rack E3C232D4U is a micro-ATX server board that accepts one Intel Xeon E3-1200 v5 or v6 processor in an LGA 1151 socket. It is built for compact rack or tower systems that need integrated remote management and dual gigabit networking. The board ships with an I/O shield and no other accessories.
Memory runs at 1600, 1866, 2133 or 2400 MT/s, though 2400 MT/s requires a v6 CPU. Only ECC UDIMMs are supported, each slot taking up to 16 GB for a total of 64 GB in dual-channel mode. Voltage is fixed at 1.2 V, so non-ECC or higher-voltage modules will not work.
The primary expansion slot is a PCIe 3.0 x16 connector that automatically halves to x8 if the adjacent x8 slot is populated. An x4 slot shares bandwidth with the single M.2 connector, and an x1 slot rounds out the layout. Builders needing two full-speed x16 devices cannot use this board.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Asrock Rack |
| Model name | E3C232D4U |
| Processor | |
| Processor | Intel® Xeon® E3-1200 v5/v6 Series |
| CPU socket | LGA 1151 |
| Supported CPU count | 1 |
| Memory | |
| DDR4 memory support | 2400*/2133/1866/1600 |
| Max supported RAM | 64 GB |
| Memory channels | Dual Channel |
| ECC support | Supports ECC UDIMM |
| Storage | |
| SATA ports | 4x SATA3 6Gb/s |
| SATA and RAID support | 0, 1, 5, 10 |
| M.2 slots | 1 x M.2 |
| Graphics | |
| Onboard video chip | Aspeed AST2400 |
| Connectivity | |
| Network speed | 1000 /100 /10 Mbit/s |
| Number of LAN | 2 |
| Ethernet controller | Intel® i210 |
| Second LAN controller | Intel® i210 |
| Maximum network speed | 1,000 Mbit/s |
| Ports & slots | |
| Number of DDR4 slots | 4 × 288-pin |
| PCIe 3.0 x16 slots | 1 |
| PCIe x4 slots | 1 x PCI Express x4 |
| PCIe x1 slots | 1 x PCI Express x1 |
| Rear panel ports | 1 x COM (Serial Port) |
| PS/2 ports | 1 |
| Serial ports | 1 |
| Video connectors | D-Sub |
| Ethernet port | 2x GLAN (by Intel® i210) |
| USB 3.2 | 4 Type-A (USB3.2 Gen1) |
| Size & build | |
| Form factor | Micro ATX |
| Width and length | 9.6 in × 9.6 in (244 mm x244 mm) |
| In the box | |
| In the box | Motherboard Only (IO-Shield is Included) |
| More details | |
| Other chipset | Intel® C232 (PCH) |
| PCI express x8 | 1 x PCI Express x8 |
| BIOS | 128Mb AMI UEFI Legal BIOS |
Both v5 and v6 Xeon E3-1200 series processors fit the LGA 1151 socket. Only v6 CPUs enable the DDR4 2400 speed; v5 parts run at 2133 or below.
The asterisk marks a limit: DDR4 2400 is only active with a v6 Xeon installed. With a v5 Xeon the memory tops out at 2133.
The M.2 connector and the PCIe 3.0 x4 expansion slot (SLOT7) share the same four lanes, so only one can be used at a time.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?