STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extracts optical and 3.5 mm audio from a 4K 60 Hz HDMI 2.0b signal with ARC support
This AUBEAMTO unit extracts audio from an HDMI source and delivers it through three simultaneous paths. One HDMI input passes video unchanged to an HDMI output while also sending digital audio to an optical Toslink port and analogue stereo to a 3.5 mm jack. It suits home-cinema owners who need to feed a soundbar or AV receiver that lacks HDMI inputs.
Verify that your source device can output 4K at 60 Hz over HDMI 2.0b and that your display accepts the same signal through the extractor’s pass-through port. The optical output carries 2.0 CH PCM or 5.1 CH bitstream formats including Dolby Digital and DTS, but the extractor does not decode them; set the source to PCM or LPCM if your amplifier cannot handle bitstream. A 5 V 1 A power adapter is included and must be connected for operation.
The extractor maintains the full 18 Gbps bandwidth during extended viewing sessions, supporting deep-colour 30-bit and 36-bit video without dropouts. Input cables up to 10 metres using AWG26 standard HDMI cable are supported, and the 600 MHz pixel clock ensures consistent 4K 60 Hz 4:4:4 transmission. Audio separation remains synchronised with video over long periods, avoiding the lip-sync drift that can appear on lesser splitters.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI to HDMI + Optical Toslink SPDIF + 3.5 mm AUX Stereo Audio Out |
| In the box | |
| In the box | 1 X HDMI Audio Extractor 1 × 5 V/1A Power Adapter 1 X User Manual |
The box contains the extractor, a 5V/1A power adapter and a user manual. A high-speed HDMI cable is also included so no separate HDMI cable purchase is required.
Choose 2.0CH for the 3.5mm stereo output or a stereo soundbar; choose 5.1CH for the optical Toslink output when connecting a surround receiver that supports Dolby Digital or DTS bitstreams.
Yes. The HDMI 2.0b path supports 4K at 60Hz with 24-bit or deep-colour 30/36-bit video and 18Gbps bandwidth, so the video passes through untouched while audio is simultaneously extracted to optical or 3.5mm.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?