We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AUBEAMTO

AUBEAMTO TJ-A022 DisplayPort cable 100ft 8K@60Hz 4K@144Hz 32.4Gbps

SKU CH-7MAC-K65WP

A 100 ft fibre-optic DisplayPort 1.4 cable carrying 8K at 60 Hz or 4K at 144 Hz at 32.4 Gbps over long distances

  • Refresh frequency8K@60 Hz 4K@144 Hz
  • Rated speedHigh Speed 32.4 Gbit/s
  • Cable length100 ft/30M
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • 8K@60Hz resolution for ultra-sharp visuals at 100ft via optical fiber
  • 4K@144Hz high refresh rate for smooth gaming over 30 metres
  • 4Gbps bandwidth ensures stable long-distance signal transmission
  • Triple-shielded solid copper construction resists interference
  • Male-to-male DP1.4 connectors support HBR3 and DSC 1.2

AUBEAMTO TJ-A022 100 ft DisplayPort cable

The AUBEAMTO TJ-A022 is a new 100 ft optical fibre DisplayPort 1.4 cable rated for 32.4 Gbps bandwidth. It supports 8K resolution at 60 Hz and 4K resolution at 144 Hz with HDR10 and DSC 1.2. The male-to-male connectors use a slim zinc-alloy shell and triple-shielded construction for long-distance signal integrity.

Suited for long runs between GPU and display

This cable suits installers routing a single DisplayPort link over 30 metres where copper cables would lose signal. It works with graphics cards, projectors and monitors that accept DisplayPort 1.2 or 1.4 inputs. Buyers who need a shorter passive cable or a different connector type should look elsewhere.

Directional fibre requires correct orientation

Installation is straightforward: plug the marked source end into the GPU and the display end into the monitor, then secure the latch connectors. The cable is flexible enough for tight bends. The most common issue is reversing the directional fibres, which results in no picture until the ends are swapped.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $69.99
Pricier than about 90% of the 3,804 comparable items (median $15.99).
Refresh frequency 8K@60 Hz 4K@144 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAUBEAMTO
Model nameTJ-A022
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedHigh Speed 32.4 Gbit/s
Display
Refresh frequency8K@60 Hz 4K@144 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male
Size & build
Overall length100 ft/30M
Cable length100 ft/30M
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

What DisplayPort version do my graphics card and monitor need to run 8K at 60 Hz over this 100 ft cable?

Both source and display must support DisplayPort 1.4 with HBR3 bandwidth to achieve 8K@60Hz across the full 30-metre length.

Will this optical fibre cable work with my existing DisplayPort 1.2 monitor at 4K 60 Hz?

Yes, the cable is backward compatible with DisplayPort 1.2 and will deliver 4K@60Hz without signal loss over the 100 ft run.

How can I verify the link is running at 32.4 Gbps after I connect it?

Check your GPU control panel or monitor OSD — it should report a 32.4 Gbps link rate and the target resolution at 60 Hz or 144 Hz.

More in DisplayPort Monitor Cables

Similar items