We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 30 metre black and blue fibre optic DisplayPort cable with male connectors at both ends

AUBEAMTO

AUBEAMTO TJ-A077 DisplayPort 1.4 fiber optic cable 30 m

SKU CH-M4PX-ERDE6

Transmits 8K 60 Hz or 4K 144 Hz over 30 metres of fiber optic DisplayPort 1.4 with 32.4 Gbps bandwidth

  • Refresh frequency8K@60 Hz 4K@144 Hz
  • Rated speedHigh Speed 32.4 Gbit/s
  • Cable length100 ft/30M
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 100 Feet

  • 8K at 60 Hz clarity from 32.4 Gbps DisplayPort 1.4 bandwidth
  • 4K at 144 Hz smoothness backed by HBR3 and DSC 1.2 support
  • 30 metre reach without signal loss thanks to fiber optic construction
  • HDR10 and HDCP 2.2 readiness for protected 8K content playback
  • Slim fiber design eases routing through walls and tight spaces

Long-range 8K fibre-optic link

The AUBEAMTO TJ-A077 is a 30-metre DisplayPort 1.4 fibre-optic cable built for installations where copper cables cannot reach. It carries 8K at 60 Hz or 4K at 144 Hz over a single male-to-male run without an external booster. The slim, flexible jacket suits tight conduits and through-wall routing in home-theatre, VR or professional AV setups.

Signal integrity over distance

Fibre construction eliminates electromagnetic interference and maintains full 32.4 Gbps bandwidth across the entire 30-metre length. No signal degradation or added latency appears at the supported 8K 60 Hz and 4K 144 Hz refresh rates. The cable draws power only from the DisplayPort source, so no separate supply or active repeater is required for normal operation.

Upgrade from length-limited copper

This cable replaces standard copper DisplayPort leads that top out at a few metres before losing 8K or high-refresh 4K stability. The jump is worthwhile when the source and display are separated by more than five metres — for example a PC in a rack driving a ceiling-mounted projector or a VR headset across a large room. It is not suited to buyers who need multiple DisplayPort outputs from one cable or who require lengths beyond 30 metres.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $74.99
Pricier than about 90% of the 3,804 comparable items (median $15.99).
Refresh frequency 8K@60 Hz 4K@144 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAUBEAMTO
Model nameTJ-A077
Product typeDisplayPort Cable
Product colorBlack & Blue
Performance
Rated speedHigh Speed 32.4 Gbit/s
Display
Refresh frequency8K@60 Hz 4K@144 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male
Size & build
Overall length100 ft/30M
Cable length100 ft/30M
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 30 m fiber optic DisplayPort 1.4 cable without damaging the connectors?

Route the slim fiber cable gently, avoiding tight bends near the male-to-male DisplayPort plugs. The aluminum alloy shells protect the smart chip, but the fiber core can fracture if kinked during through-wall pulls.

What part of the AUBEAMTO TJ-A077 will need replacement first under normal use?

The fiber optic cable itself has no active electronics to wear out. Only the male DisplayPort 1.4 connectors or the aluminum shells could sustain physical damage if repeatedly plugged or crushed.

At what resolution and refresh limit does the 32.4 Gbps bandwidth saturate during sustained 8K output?

The cable is rated for 8K at 60 Hz and 4K at 144 Hz. Pushing beyond those modes would exceed the HBR3 and DSC 1.2 limits built into the DisplayPort 1.4 link.

More in DisplayPort Monitor Cables

Similar items