We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.0 cable with male connectors on both ends, 3.3ft length

AUBEAMTO

AUBEAMTO TJ-A114 DisplayPort 2.0 cable 3.3ft 80Gbps

SKU CH-7K1M-PTG72

A 3.3 ft DisplayPort 2.0 cable carries 80 Gbps for 16K at 60 Hz, 8K at 60 Hz or 4K at 165 Hz with Dynamic HDR

  • Refresh frequency16K@60 Hz, 10K@60 Hz, 8K@60 Hz, 4K@165 Hz, 4K@144 Hz
  • Rated speed80 Gbit/s
  • Source connector1 x DisplayPort 2.0
  • Destination connector1 x DisplayPort 2.0
  • Connector genderMale to Male
  • Product typeDisplayPort Cable

Cable Length 3.3 Feet

  • 80 Gbps bandwidth enables 16K at 60 Hz
  • 16K, 10K, 8K and 4K at 165 Hz supported
  • Dynamic HDR with 4:4:4 colour for accurate images
  • Triple-layer shielding and solid copper prevent signal loss
  • Backwards compatible with DisplayPort 1.4 and 1.2 devices

DisplayPort 2.0 cable for ultra-high resolutions

The AUBEAMTO TJ-A114 is a male-to-male DisplayPort 2.0 cable rated for 80Gbps bandwidth. It supports single-display resolutions up to 16K at 60Hz and handles 4K at 165Hz or 144Hz without compression. Dynamic HDR with 4:4:4 colour format is carried over the 3.3ft link. The cable is backward compatible with DisplayPort 1.4 and 1.2 sources and sinks.

Suited to high-refresh 4K

This cable targets users driving 4K monitors at 144Hz or 165Hz, plus early adopters of 8K or 10K displays at 60Hz. It also serves 16K single-stream workflows at 60Hz. Builders who only need 1080p or standard 4K at 60Hz will not benefit from the 80Gbps headroom. Buyers requiring longer runs beyond 3.3ft should look at active or optical alternatives.

Fits between a DP 2.0 GPU

Connect the cable directly from a DisplayPort 2.0 graphics card or laptop to a compatible monitor, projector or HDTV. The triple-shielded solid-copper conductors resist interference, freeing the link from signal loss at maximum rates. No external power or driver installation is required; the connection is plug-and-play. Ensure both source and sink support the target resolution and refresh rate.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 91% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@60 Hz, 10K@60 Hz, 8K@60 Hz, 4K@165 Hz, 4K@144 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAUBEAMTO
Model nameTJ-A114
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speed80 Gbit/s
Display
Refresh frequency16K@60 Hz, 10K@60 Hz, 8K@60 Hz, 4K@165 Hz, 4K@144 Hz
Ports & slots
Source connector1 x DisplayPort 2.0
Destination connector1 x DisplayPort 2.0
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

What source device and display must I already have for the 80Gbps link to work?

Both the graphics card and the monitor need a DisplayPort 2.0 port; the cable is male-to-male and carries 80Gbps only when each end negotiates DP 2.0.

Will the TJ-A114 cable run at full speed if I keep my current DP 1.4 monitor?

The cable is backwards compatible with DP 1.4 and 1.2, so it will work, but the link will negotiate at the older standard’s lower bandwidth instead of 80Gbps.

How can I confirm the cable is delivering 16K at 60Hz after I plug it in?

Open the display settings on the source PC and verify the active resolution reads 15360×8640 at 60Hz with 4:4:4 colour format and HDR enabled.

More in DisplayPort Monitor Cables

Similar items