We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 70mm frame 15mm deep three-wire lead

AVC

AVC C7015B12M 70mm 12V 3800 RPM 3-Pin diy cooling

SKU CH-NG3T-6DQGR

A 70 mm dual-ball-bearing fan spins at 3800 RPM to move 23.2 CFM at 34.5 dBA from a 12 V, 0.20 A, 2.4 W three-pin connector

  • Compact 70 mm frame fits tight build spaces
  • Dual ball bearing runs at 3800 RPM for long service life
  • 2 CFM airflow delivers strong spot cooling
  • 5 dBA noise keeps system acoustics low

Compact 12 V 70 mm fan for tight builds

The AVC C7015B12M is a 70 x 70 x 15 mm DC fan that runs on 12 V and draws 0.20 A for 2.4 W of input power. Its dual-ball bearing spins at 3800 RPM to deliver 23.2 CFM of airflow while producing 34.5 dBA of noise. The three-pin connector supplies a tachometer signal for speed monitoring.

Replaces worn 70 mm coolers when dual-ball

Swap this unit in when an existing 70 mm sleeve-bearing fan has become noisy or seized after extended use. The jump is worth it if the original cooler cannot be lubricated and the chassis has no room for a larger frame. Builders who need higher static pressure or PWM control should look elsewhere.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $29.99
Pricier than about 71% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What are the exact mounting-hole dimensions for the 70 mm square frame?

The fan measures 70 mm on each side with a 15 mm thickness, so mounting holes follow the standard 70 mm square pattern.

How do I connect the 3-pin lead to a motherboard header without losing speed control?

Align the keyed 3-pin connector with the 12 V, ground and tach pins on the motherboard header; the board regulates voltage to vary the 3800 RPM speed.

More in Heatsinks & Water Blocks

Similar items