We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sabrent M.2 2280 heatsink, copper base with grooved aluminum fins, 3.1 by 1.0 by .9 inches

Sabrent

Sabrent SB-HTSK M.2 2280 Heatsink

SKU CH-ZHVY-WX162

An M.2 2280 heatsink using copper and aluminum to absorb and spread heat from NVMe SSDs, supplied with thermal tape, screws and a screwdriver for easy desktop installation

  • Form factorM.2 2280
  • Product typeHeatsink ssd
  • Intended useConsumer
  • Heat sinkWith HeatSink
  • Product depth0.9 in (2.29 cm)
  • Key featuresDesigned for desktop computers. Winning combination of coppe
  • Copper and aluminum construction draws heat away from the drive
  • Grooved aluminum surface increases cooling area to reduce thermal throttling
  • Fits single-sided and double-sided M.2 2280 SSDs
  • Thermal tape, screws and screwdriver included for quick fitting
  • Compact 3.1 by 1.0 by 0.9 inch profile suits desktop builds

M.2 2280 SSD heatsink

The Sabrent SB-HTSK is a passive cooler built for M.2 2280 solid-state drives in desktop computers. It uses a copper base to draw heat from the controller and NAND, then spreads it across a grooved aluminium fin stack. Thermal tape, mounting screws and a screwdriver are supplied in the package.

Fits single and double-sided drives

The bracket clamps over both single-sided and double-sided M.2 2280 modules without blocking adjacent slots. Installation requires no extra tools beyond the included screwdriver and adds only 3.1 inches of length, 1.0 inch of width and 0.9 inch of height to the drive profile. The copper-aluminium construction moves heat away from the PCB so the drive can sustain its rated throughput.

Replaces stock motherboard shields

Builders whose motherboard heatsink is missing, too low or incompatible with double-sided modules gain a universal alternative. The jump is worth it when an NVMe drive throttles under sustained writes or when the factory pad does not contact all components. It is not for laptops or systems that rely on the original motherboard shield for structural retention.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 63% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSabrent
Product lineHeatsink
Model nameSB-HTSK
Product typeHeatsink ssd
Intended useConsumer
Size & build
Form factorM.2 2280
Heat sinkWith HeatSink
Overall height3.1 in (7.87 cm)
Overall width1.0 in (2.54 cm)
Product depth0.9 in (2.29 cm)
Shipping weight0.17 kg
Package size110 × 77 × 28 mm
In the box
Included items• Rocket NVMe Heatsink.
• Thermal tap.
• Screws.
• Screwdriver.
• Installation guide.

Questions about this item

Will the 3.1 inch height fit inside my desktop case without blocking other components?

The heatsink stands 3.1 inches tall, 1.0 inch wide and 0.9 inch deep, so measure your motherboard clearance before installing.

Does the aluminium and copper construction stay quiet and cool during continuous heavy writes?

The passive copper-and-aluminium design has no fan, so it runs silently while spreading heat across the grooved aluminium fins to limit thermal throttling.

What tools or extra parts do I need before I can mount this on my M.2 2280 drive?

Thermal tape, mounting screws and a screwdriver are all included in the package, so no additional tools are required.

More in Heatsinks & Water Blocks

Similar items