Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 30 cm sleeved extension kit supplies 24-pin ATX, 4+4-pin EPS, two 8-pin and two 6-pin PCIe connectors with 16 AWG triple-layer weaving and cable combs
This AZZA ACAZ-002 kit supplies sleeved extension cables for a 24-pin ATX connector, one 4+4-pin EPS connector, two 8-pin PCIe connectors and two 6-pin PCIe connectors. It is intended for builders who want a white and silver colour scheme inside a standard ATX system. The cables are quad-shielded and use a triple-layer woven design with 16AWG conductors.
Every cable in the kit measures 11.81 inches, which is 30 cm or 300 mm, with white connectors on both ends. This set length decides whether the kit reaches the required components in a specific chassis layout. Builders needing longer runs or different connector counts will not be served by this package.
The extensions are passive wiring with 100% heatshrink-free construction, so they add no active heat or noise to the system. Power delivery depends entirely on the host power supply and the attached components; the cables themselves introduce no additional draw. The 16AWG gauge and quad shielding are designed to maintain signal integrity under normal loads.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | White & Silver |
| Size & build | |
| Overall length | 11 in - 15 in |
| Cable length | 11.81 in (30 cm) |
| Cable shielding | Quad-shielded |
The 30 cm extensions add just enough reach to route the 24-pin, EPS and PCIe cables behind the motherboard tray without leaving large loops that block airflow.
Both PCIe cables use the standard 8-pin and 6-pin pin-outs found on modern graphics cards, so they work with any PSU that supplies matching native connectors.
The 24-pin plug and its included comb require roughly 30 mm of depth behind the motherboard edge to seat fully without bending the pins.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?