Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Ultrasonic proximity sensor detecting objects from 300 mm to 3 m with temperature compensation, selectable NPN/PNP output and 2 m cable
The Banner T30UXDC is a barrel-style proximity sensor that uses ultrasonic time-of-flight measurement. It suits automation engineers who need non-contact distance detection up to three metres. The 10-30 V dc supply and selectable NPN or PNP output make it compatible with common industrial control systems. Buyers who require analog output or IO-Link communication should look elsewhere.
A fixed 2 m cable with four conductors terminates the sensor, so no separate cordset is required. Output mode is chosen via the teach button; there is no PC configuration option. The 500 ms power-up delay means the first reading is not immediate after supply voltage is applied. Vibration and shock ratings meet MIL-STD-202F Method 201A and IEC 60947-5-2 respectively.
The single switched output sinks or sources up to 100 mA with saturation below 1.6 V for NPN and below 3 V for PNP. Short-circuit protection is built in. Repeatability is specified as 0.1 % of measured distance with a 1.5 mm minimum. Temperature effect is 0.02 % of sensing distance per degree Celsius. IP6 rating covers the PBT housing.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | BANNER |
| Model name | T30UXDC |
| Product type | Test Equipment |
| Color and finish | Red |
| In the box | |
| Number of items | 1 pack |
Check the LED indicators on the sensor housing; they show output status and confirm the 10-30V dc supply is active and the discrete NPN/PNP output is switching within the 0.1% repeatability spec.
The box contains one T30UXDC sensor with a fixed 2 m (6.5 ft) 4-wire cable; no quick-disconnect connector or mounting hardware is supplied, so brackets or a compatible mounting block must be bought separately.
This model covers 300 mm to 3000 mm; select it when the target falls inside that window — objects closer than 300 mm or farther than 3 m require a different sensor variant.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?