We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black G1/4 45-degree dual rotary fitting with two 360-degree swivel joints

Barrow Mods

Barrow Mods G1/4" 45 Degree Dual Rotary Fitting - Black

SKU CH-H4EX-PE5C1

A 45-degree dual rotary fitting with 360-degree rotation at both joints to prevent tubing kinks in tight water-cooling loops

  • Product typeFittings

Color Black

  • Extends ports at a 45 degree angle for tight block spacing
  • Dual rotary joints spin 360 degrees each to prevent tubing kinks
  • G1/4 inch threaded connection fits standard water-cooling loops
  • Black finish matches common loop aesthetics
  • Two rotation points allow flexible routing without stress on tubing

45-Degree Dual Rotary Adapter

The Barrow Mods G1/4" 45 Degree Dual Rotary Fitting connects two water-cooling components at a fixed 45-degree angle. It is designed for custom-loop builders who need to link blocks or radiators positioned very close together without using a length of tubing.

Replaces rigid tubing runs

This adapter removes the need for a short, bent tube between tightly spaced ports, which can be difficult to route without kinking. The jump is worth it when clearance is too tight for a clean tube bend or when a direct connection would strain the port threads.

G1/4" thread constraint

The fitting uses standard G1/4" threads, so it only works with components sharing that thread size. Each end rotates 360 degrees independently, letting you align the 45-degree offset precisely, but the angle itself cannot be adjusted.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 70% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeFittings

Other versions of this model

5 more in the same range

Questions about this item

What thread size does this 45-degree dual rotary fitting use?

The fitting uses a G1/4" thread on both rotary connections, matching the standard thread found on most water-blocks, radiators and reservoirs.

How do I install the dual rotary fitting without stripping the threads?

Hand-tighten each G1/4" end until the O-ring seats, then give a very light turn with a soft-jaw wrench; the two 360-degree rotary joints let you align the 45-degree angle afterwards without re-torquing.

When should I replace the O-rings on this rotary adaptor?

Inspect the O-rings whenever you drain the loop; replace them if they feel hard, show cracks or if you see any seepage at either rotary joint.

More in Heatsinks & Water Blocks

Similar items