Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 ft red Cat 6 patch cable with snagless RJ-45 connectors for gigabit Ethernet
This Belkin Cat 6 patch cable supports 100Base-T and gigabit Ethernet across a 50 ft run. It replaces older Cat 5 links that cannot carry those speeds. The 50-micron gold-plated RJ-45 connectors on each end ensure clean signal transfer. It suits home and office drops where a red jacket aids cable identification.
The cable draws no power and generates no heat or noise during normal operation. Its unshielded twisted-pair construction relies on the Category 6 specification for crosstalk control. Installers can route it through walls or trays without worrying about fan clearance or thermal limits.
Moulded snagless strain reliefs shield the RJ-45 locking tabs from bending or breaking during pulls. The red PVC jacket adds visual contrast in dense patch panels. No software or driver is required; the link negotiates speed automatically when plugged into compatible ports.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Belkin |
| Model name | A3L980-50-RED-S |
| Product type | Consumer Electronics |
| Product color | Red |
| Connectivity | |
| Cable category | 6 |
| Ports & slots | |
| First connector | RJ-45 Male |
| Second connector | RJ-45 Male |
| Size & build | |
| Overall length | 50 ft (15.2 m) |
| Shielding | No |
| Shipping weight | 0.91 kg |
| Package size | 25 × 25 × 23 mm |
The snagless moulded boots cover the release tab on both RJ-45 connectors. Route the 50 ft length, then push each plug straight in until it clicks — do not pull sideways on the boot or the tab can still snap.
The gold plating resists corrosion, so no scheduled contact cleaning is required. Replace the cable only if the snagless boot tears, a connector becomes loose, or the jacket shows kinks that affect signal quality.
At 50 ft the cable stays well within the 100 m Cat 6 channel limit, so the first bottleneck is usually the switch or NIC port speed, not the copper link itself.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?